Disco Drinks 1 ltr per 1km

Quote:

---

Originally Posted by rod baker

just my 2 cent worth i had a 3.9 that was using water so stripped her down and had the heads serviced she is a dual fuel car was running ok other than the head gasket leak on reassembly i thought i had all conections right but i stuffed it up even with the help of a manual .now i work on a lot of vehicles but it ran like **** used heaps of petrol and didnt run right on lpg . i did know rover real well

found out the injectors are not all the same you have to have the right injector in the right spot and i had one injector plug on the fuel temp sensor and its plug on an in injector it ran super rich
sent it to a rover mech who giggled said seen it before swapped injectors around to correct spots and fixed the wiring and wow its never gone this well
rod

---

Sorry for the slow reply, i forgot what my user was, so i had to make a new 1 and started a new thread.

I have all the wiring on in the correct place, as i have stripped the efi wireing to check all colours etc, this thing has been a nightmare, i think it is just one of those cars that is a jinks. freaken had it :mad:

Started the other post over at efi dramas continue.

Thanks for sharing.

dont suppose at any time you fitted a pressure gauge to the Fuel Rail ? Seen 70 PSI there with a pinched return Line ,that will do what you say is happening .
What is the condition of your ignition system ,What amp,what plugs,what leads,what static and running advance retard. Also seen this when Dizzy cap spring loaded carbon brush pops out!!Earthed out rotor button?