Page 2 of 2 FirstFirst 12
Results 11 to 12 of 12

Thread: LT95 diaphragm replacement

  1. #11
    Join Date
    Jan 2010
    Location
    Sydney
    Posts
    240
    Total Downloaded
    0
    Rang LRA- don't have any replacement diaphragms. Can get a SH one for $130- no dice!

    Bought a new one from the UK for $74 AUD.. So I bought 2.. and some other stuff..

    Credit cards are bad mkay.

  2. #12
    Join Date
    Jan 2010
    Location
    Sydney
    Posts
    240
    Total Downloaded
    0
    Ok so I did the job today. Very easy just a couple hints to help anyone else doing the same job.

    1. You don't have to drain the transfer case. Just have the car on a set of ramps and you'll be fine.

    2. When re installing new actuator, don't bolt it in until you've put the roll pin back in the shaft. Otherwise you'll probably twist/tear the diaphragm inside.

    3. Lube helps on the shaft.....

    Easy job, parts readily available from either lrseries or from rimmerbros. Rimmerbros have the o ring and gasket listed, lrseries do not.

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!