Thread: 2001 TD5i Clutch shudder

Hi there,
Could have sworn I put this in yesterday but must have pressed the wrong button and it disappeared.
Anyway my disco has done 236000 ks and is on its 2nd clutch. The first one died with a failure of the pressure plate.This one has done maybe 50/60000 ks. Was changed at a shop twice as the wrong one was installed first time.
Little towing and I don't think I abuse it much.
It shudders when cold and is pretty ok when warm and using slightly higher revs and finesse will overcome it sometimes.
OK mostly when hot. Worse in reverse and complains a lot more in low range.
I was wondering if it might be the dual mass flywheel.
Just read DinoH's thread on removing the gearbox.
I have a hoist and the CD.
I need some help with ideas and some inspiration.
Thought the engine stand thru the door was a great idea but may not work if I use the hoist.

Thanks

Trackless

Sorry to all must be blind. I did post this yesterday but couldn't find it.
Still the same questions though.
Any easy ways to do it od the Disco.

trackless