Td5 service. Thoughts?

Well....
Full fluid swap out, replaced ATF cooler and hoses, general service items.
$2000 bill later and the Disco is running like a dream :D
AND mum didn't kill me when I told her how much I forked out...
She must be coming down with something :( :wasntme:
Cheers for all the info guys, I'll get the rest sorted out some other time :D
Muppet

Quote:

---

Originally Posted by Xtreme

A pair of your grandfather's old nail pincers with the jaws ground back to a more acute angle will do the job of refitting the Fuel cooler clamps.
Use the viton 'O' rings - use search to find the actual part number, available from most bearing/seal suppliers.
Take the cooler off and replace 'O' rings in each end while you're at it.

---

All well and good if you have your grandfathers old nail pincers, and the facilities to grind them to the required shape. Lacking both, the clic-r pliers at around $18 seem a pretty reasonable way to go.

If you use pliers (and perhaps small pincers) the o-ring replacement can be done with the cooler in place.

cheers
Paul