Results 1 to 7 of 7

Thread: stud pattern

  1. 7th October 2012, 05:10 PM #1
    Manaroo12 Guest

    stud pattern

    Hi folks, I'm new to Land Rovers. I have a 1996 Discovery and would like to
    know the stud pattern for the wheels.
    Thanks in advance
    Manaroo12
    Reply With Quote Reply With Quote
  2. 7th October 2012, 05:20 PM #2
    alien's Avatar
    alien
    alien is offline A Keeper of the TGO Silver Subscriber
    Join Date
    Jun 2009
    Location
    Bacchus Marsh Vic.
    Posts
    3,340
    Total Downloaded
    0
    Can't help with the actual spacings but the D1's(yours) and the Clasic Range Rovers are the same stud spacings.
    Cheers, Kyle



    The Good Oil.
    When did you last visit?
    http://www.aulro.com/afvb/good-oil/


    Reply With Quote Reply With Quote
  3. 7th October 2012, 05:38 PM #3
    pop058's Avatar
    pop058
    pop058 is offline ForumSage
    Join Date
    May 2008
    Location
    Bundaberg Qld
    Posts
    7,036
    Total Downloaded
    0
    PCD is 165mm for county/defenders, classic rangies and series Landies. Stud sizes and threads vary amongst that lot. Changes to 120mm for D2 and P38 (on) Rangies.

    HTH
    Reply With Quote Reply With Quote
  4. 7th October 2012, 06:13 PM #4
    Manaroo12 Guest

    Wheel stud pattern

    Hi Folks,
    I am new to Land Rovers, I have a 1996 V8 Discovery and would like to fit 265/75 R16 tyres, I have a lift ect. the main problem is with rubbing on the radius arms.
    The current offset on the rims is pos33. So would like to use rims with a offset of 0 or Neg 5.
    My question is what stud pattern is the car ie; 5x150, 5x6.5 or what ever.
    Thanks in advance
    Manaroo12
    Reply With Quote Reply With Quote
  5. 7th October 2012, 06:24 PM #5
    pop058's Avatar
    pop058
    pop058 is offline ForumSage
    Join Date
    May 2008
    Location
    Bundaberg Qld
    Posts
    7,036
    Total Downloaded
    0
    check your other thread
    Reply With Quote Reply With Quote
  6. 7th October 2012, 06:35 PM #6
    boofdtl's Avatar
    boofdtl
    boofdtl is offline Master
    Join Date
    Sep 2010
    Location
    melton, vic
    Posts
    440
    Total Downloaded
    0
    I run a +12 off set on my D1 with 265/75/16 and it hits a small amount and the rim is a 16x7 PCD is 5x165.3
    D2 is 5x120
    Reply With Quote Reply With Quote
  7. 7th October 2012, 09:06 PM #7
    PhilipA
    PhilipA is offline Swaggie Subscriber
    Join Date
    Jan 1970
    Location
    Avoca Beach
    Posts
    14,164
    Total Downloaded
    0

    Hi folks, I'm new to Land Rovers. I have a 1996 Discovery and would like
    to
    know the stud pattern for the wheels.
    As above 5X165MM.
    AFAIK there are NO other vehicles that use that pattern, so any wheels have to be made for Land Rovers to fit.

    I assume you are wondering whether wheels from another make fit or want to have trailer hubs drilled. There are LOTS of threads on that.

    BTW It is OK to ask the direct question.
    Regards Philip A
    Reply With Quote Reply With Quote
« Puma front diff oil black again after 4,500ks nil water crossings? | Wrong oil D2 transfercase. »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!