What/where are the "T" seals?
well i finally did it and eliminated all the oil leaks on my Disco 300TDi, Things i did was Vacuum pump mod,oil return from oil cooler, fitted Provent, and finally T seals. My first attempt at the T seals was a failure, i fitted the rubber seals, coated front and sides with sealastic, put it all together and it leaked worse than before, luckily i never used the car as when i pulled it apart again i found the seals had grabbed between the cap and the casing so the clearance was way over. A bit more of a search turned up a method of injecting silicone instead of the rubber seals. Too easy and now ( for the moment) my landy is leak free.
![]()
What/where are the "T" seals?
Andrew
1998 Landrover Defender 300Tdi 130 HCPU Expedition
1972 Peugeot 504 Sedan - Daily Driver
Interested in your injection method
Was it possible with the transfer in situ?
Thanks,
Mary
"Some people walk in the rain,others just get wet!" -Roger Miller
Half your luck, every time I fix an oil leak another one starts. I am at the point of giving up and getting a reco engine
Steve
Leak free???
Nahhh... You need to check the levels, I think you've run out.
M
No oil level is OK. Been running a week now and still not a leak in sight.12engine_hylosil.pdf
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks