true and i think with the 6mm plate on the back and under side of the sill it would have to be a pretty good wack to bend a sill
Printable View
true and i think with the 6mm plate on the back and under side of the sill it would have to be a pretty good wack to bend a sill
The ones I have are Bearmach (spelling).Quote:
Originally Posted by greendisco2
They bolt off the chassis outriggers that have the mounts to the body.
I have come down hard on them and they haven't moved, or bent, just lost some of the paint :p
interesting,so how do they mount to the outrigger?
The sliders come with a bracket front and rear that picks up an existing hole on the outrigger, plus 1 hole needs to be drilled. All bolts, washers and nylocs are supplied with the kit, including idiot proof instructions with pictures.
I looked at the outrigger before committing to install the kit to see if there was risk of bending, but the design of the outrigger (looks to be 4mm steel that is pressed) and its very solid.
Here's a link to a thread with my RRC in it. There are pics about halfway down on page 1.
http://www.aulro.com/afvb/members-ri...68-rangie.html
thanks for that and a nice rangie to boot,i wish i still had mine but the x got the 92 and bender got sold:(
No problem.
Cheers:D