Results 1 to 5 of 5

Thread: Stud pattern

  1. 17th January 2013, 09:10 PM #1
    Mightyhawks Guest

    Stud pattern

    Hi all
    My first question for AULRO.
    Could someone please tell me if 17 inch d3 wheels will fit a stock d2 with 16 inch wheel

    Thanks
    Reply With Quote Reply With Quote
  2. 17th January 2013, 09:13 PM #2
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,253
    Total Downloaded
    0
    Stud patterns are identical but the D3 rims will need a hub centering ring for the smaller D2 mounting ring.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
  3. 17th January 2013, 09:13 PM #3
    Slunnie's Avatar
    Slunnie
    Slunnie is offline Swaggie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    14,267
    Total Downloaded
    99.87 MB
    They do as I understand it but have not done. They are both 5x120, but the centralising spigot is smaller on the D2, so you will need to usea ringcentric to make sure wheel is located properly. You will also need to use D3/4 wheel nuts which are the same thread as the D2. There is a slight difference in the wheel offset between the 2, and I'm not sure what that is or which way it goes.
    Cheers
    Slunnie


    ~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
    Reply With Quote Reply With Quote
  4. 18th January 2013, 12:30 AM #4
    clubagreenie's Avatar
    clubagreenie
    clubagreenie is offline TopicToaster
    Join Date
    Dec 2007
    Location
    Sydney, you know. The olympic one.
    Posts
    4,853
    Total Downloaded
    0
    Out of curiosity, what type of nuts are the D3? Tubular or tapered seat?
    Reply With Quote Reply With Quote
  5. 18th January 2013, 05:59 AM #5
    Graeme
    Graeme is online now Swaggie Vendor
    Join Date
    Jan 1970
    Location
    NSW SW Slopes
    Posts
    12,253
    Total Downloaded
    0
    D2 offset is 57 mm positive whereas the D3 is 53 mm positive so not much difference and out more rather than in. D2 centering flange is 70 mm, D3 is 72.6 mm. D3 uses the same style of flat base nuts but different dia base.
    MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
    VK2HFG and APRS W1 digi, RTK base station using LoRa
    Reply With Quote Reply With Quote
« Windscreen Sealant............ | Enough Already? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!