Oil pressure light.
Ok I fess up I`m a nong. I keep leaving the twenty four volt key in the switch and over night it will flatten the battery's. As I start the old ute with twenty four volts this is not only annoying it also means I`m not going anywhere till the battery`s are charged. So what I thinking was a light, ah but no ordinary light. I need a light that comes on when the key is turned on to power the twenty for volt system then turns of when the motor starts. Much like a ignition light. But the 24 volt on the ute is supplied by a generator so a normal ignition light wiring is not a option. So that is question to you all. How can it be done? The twenty four volt key is a battery isolator key, so is only a simple rotary off on switch.
Cheers Hall
Oil pressure light.
From the Switched + side of the isolator to side one of the light from the other side of the light to the oil pressure switch.
I would use one of the 24v bezel mount blinky imitates a security system led as opposed to a normal incandescent light.
If its got a door light switch wire a 24v piezo buzzer between the switched side of the iso switch and the door switch That will make a buzzer sound any time you open the drivers door when the iso is on or the engine is running.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
Thank you all for that. Have a light ( nice bright can`t miss it one ),so I`ll have to get a oil pressure switch.
Cheers Hall
umm no,
a nice bright light will draw too much power for the switch to handle and will destroy the switch.
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
It`s just a 24 volt in dash warning light.a nice bright light will draw too much power for the switch to handle and will destroy the switch.
Cheers Hall
fair enough, but more than about 5w worth will toast the oil pressure switch contacts.
(we may just have different definitions of the word "bright")
Dave
"In a Landrover the other vehicle is your crumple zone."
For spelling call Rogets, for mechanicing call me.
Fozzy, 2.25D SIII Ex DCA Ute
TdiautoManual d1 (gave it to the Mupion)
Archaeoptersix 1990 6x6 dual cab(This things staying)
If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
If you think you're in front on the deal, pay it forwards.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks