You could try a Farm or irrigation supplier. The hose for the water pumps would be similar if not the same. There should be some suppliers in your area.
G'day all. My old 300tdi snorkel will no longer just bolt straight up to the Isuzu air cleaner - I need to get my hands on some 3" flexible concertina hose or something similar to run between air cleaner and snorkel. Anyone know if this stuff is commercially available and where I might get some?? Any help would be appreciated.
You could try a Farm or irrigation supplier. The hose for the water pumps would be similar if not the same. There should be some suppliers in your area.
Cheers, David.
My Land Rover has made me a better Mechanic........
D2 TD5 Manual, CDL, Detroit Rear, Truetac Front, 2" OME lift, 32" MT Tyres, ARB Bull Bar, Winch, TJM Roof Rack, Driving Lights, Dual Batteries, ARB Side Steps, Rear Draws, Uhf.
I got mine from a hose and rubber place near work.
Can pick some up tomorrow for you if you want - just let me know how long you need.
Be warned though, its crap from an airflow perspective. I'll be replacing mine at some stage with some solid tube and joiners.
Snorkel with about 80cm of corrugated 3" causes over 15"H2O extra restriction in my system, and you'll be sucking more air than mine does.
Steve
1985 County - Isuzu 4bd1 with HX30W turbo, LT95, 255/85-16 KM2's
1988 120 with rust and potential
1999 300tdi 130 single cab - "stock as bro"
2003 D2a Td5 - the boss's daily drive
Hmm, might take you up on that - will let you know later when I measure up. I have always wondered how much the corrugated hose would disrupt airflow - have to say I got a bit of a shock when I saw how much the gaping mouth of the Safari snorkel shrunk down to a measly 2½" flexi hose that bent left, right and centre![]()
By the looks of things, I'm not in as bad a shape as I thought I was. The work itself is more or less done, anything that needs to be fabricated has been. Now it's plumbing and a little wiring, and hopefully she'll turn over. Big shop tomorrow, and a good weekend's work, and with a bit of luck she'll be running by Sunday.
I have one more spot of welding to do, now I just need to find someone with, say, a TIG welder who'll weld a couple of T's to my stainless heater lines...![]()
![]()
...... or you could look for proper internally wound (supported) flexible air intake hose which is smooth. Aviation stock at Moorabin, but if your hip pocket nerve is sensitive look for commercial stock![]()
Cheers
RF
Try Purple Pig in Bayswater Purple Pig - Industrial hoses, fittings and rubber products.
or HIS Hose, Dandenong Purple Pig - Industrial hoses, fittings and rubber products.
Terry
80 109" 2.6 P ex Army GS, saved from the scrappie.
95 300tdi 130 Single cab tray.
2010 Guzzi 750
oops.
I'll try HIS Hose again
http://www.hishose.com.au/\
sorry
Terry
80 109" 2.6 P ex Army GS, saved from the scrappie.
95 300tdi 130 Single cab tray.
2010 Guzzi 750
Mike, I bought this stuff years and years ago for the Tdi.
Eximo SpeedLock - Modular And Flexible Duct - SunFlex
I used the 82mm ID stuff.
I also cut off the small 2" spigot on the inside of the snorkel to reduce the restriction there too and used some non-setting mastic under the hose on the spigots to make sure everything was watertight.
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks