Just seeing if anybody knows anything on turbosmart boost tee's I'm not really trying to get higher psi more intrested in having the turbo kick in at a lower rpm
Fossicker
I've used them before on a petrol turbo, it will make absolutely no difference to the spool time, it will only delay the opening of the waste gate (if thats what you have) and give you a higher boost pressure.
My wife thinks that turning the oven on to 280 degrees will make it heat up faster, it doesn't, it just burns the food (with over boost)
Cheers
Marc
Wizard
Originally Posted by Mattblack59bus
I've used them before on a petrol turbo, it will make absolutely no difference to the spool time, it will only delay the opening of the waste gate (if thats what you have) and give you a higher boost pressure.
My wife thinks that turning the oven on to 280 degrees will make it heat up faster, it doesn't, it just burns the food (with over boost
Cheers
Marc
Will help wth spool up time, if your getting wastegate creep.
Fossicker
I would have thought to make any difference with creep you would end up with a much higher final boost.
One method of reducing wastegate creep (I have read, but not tried) is to use a large volume line to the wastegate actuator, the more volume the larger the delay before the pressure builds on the actuator. I'm not sure what more volume means, no good if you have to attach a 44 gallon drum under the hood or 500 meters of line.
Cheers
Marc
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks