HI All
Sorry Title should be Auto Wading Plug whole.
I have one of the proper locking tools
Laser 4052 Land Rover Timing Pins Land Rover TD5 Tool Garage Auto | eBay
I use the big one in the threaded whole in the bell housing and it is a perfect fit. when I turn the motor over on the balancer bolt I can feel the pin contact with the fly wheel but it doesn't seem to want to lock into a slot. Is there a trick.
I am removing the Harmonic balancer and trying to avoid making a tool to bolt onto the balancer itself when I already have this locking took.
cheers
Mattg
Swaggie
There is only 1 hole in the flywheel for the bolt to engage. Remove the bolt and use a small screw-driver to locate the hole then fit the bolt. You may need to rock the shaft back and forth a little to get the bolt to line-up exactly.
Edit: On second thoughts, that bolt is only meant to be used to set the camshaft timing and is not likely to be strong enough to lock the crankshaft to loosen or tighten the front pulley.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Took the starter out and put a socket extension into the whole in the fly wheel. Worked a treat. Matt
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks