Results 1 to 4 of 4

Thread: 12v Hydraulic pump advice required

  1. 25th June 2013, 08:35 AM #1
    clubagreenie's Avatar
    clubagreenie
    clubagreenie is offline TopicToaster
    Join Date
    Dec 2007
    Location
    Sydney, you know. The olympic one.
    Posts
    4,853
    Total Downloaded
    0

    12v Hydraulic pump advice required

    Need to source a 12v hyd pump, requirements are;

    Oil Flow 5-45L/min
    Pressure 11MPa

    In a small form factor as possible, preferably with a remote reservoir.

    Have been looking around at alibaba etc but spoilt for choice but none really fit the bill. Any advice or known sources would be appreciated.

    Regards

    Justin
    Reply With Quote Reply With Quote
  2. 25th June 2013, 04:24 PM #2
    pop058's Avatar
    pop058
    pop058 is offline ForumSage
    Join Date
    May 2008
    Location
    Bundaberg Qld
    Posts
    7,036
    Total Downloaded
    0
    What about the small power packs used on tail loaders and small ute cranes ?
    /
    Google Image Result for http://tipperkits.com.au/tka/images/Powerunit.JPG
    Reply With Quote Reply With Quote
  3. 25th June 2013, 09:44 PM #3
    Rick1970's Avatar
    Rick1970
    Rick1970 is offline Master Subscriber
    Join Date
    Apr 2011
    Location
    Dungowan
    Posts
    916
    Total Downloaded
    0
    What are you trying to do?

    45l/min @ 11Mpa could be a big ask.....that's around 11.9GPM @ 1600psi which would require a motor (in theory) of around 13hp to drive....the DC motor would slow under load tho, reducing flow, hence HP input requirements.

    Most of the common DC pumps around for small tippers, tailgate loaders and the like, would give flows in the 7-15L/min range. The duty cycle of these type of units is usually pretty average also....typically around 10% run time.
    Reply With Quote Reply With Quote
  4. 25th June 2013, 10:08 PM #4
    clubagreenie's Avatar
    clubagreenie
    clubagreenie is offline TopicToaster
    Join Date
    Dec 2007
    Location
    Sydney, you know. The olympic one.
    Posts
    4,853
    Total Downloaded
    0
    Yes, the duty cycle has been the issue in locating a suitable unit. (kw was what I found to be approx size for a motor, one unit is available (pump/motor assy only) for $900- plus fittings, hoses etc and solenoids.

    Added to which I just had the auto die in the disco. Due to lack of fluid when refilled by mechanics after smash repairs. Interesting times for the additional claim for that.
    Reply With Quote Reply With Quote
« AULRO laser / plasma cutting | R380 Another Failure, What to do...? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!