Thread: Td5 clutch not disengaging properly after replacing clutch and flywheel

Hm, maybe better to remove the boxes again, i know how i need to now as I've just done it.

Had the pushrod from the slave cylinder out today. It was pretty worn at ball end. Could this have anything to do with my clutch issues ?
Tried to look with a scope through the slave cilinder hole today if I could see if the clutch is fitted wrong,but could not see it

Just confirming that this weekend I had these exact symptoms after replacing a clutch and it was indeed due to the fact that I had put the clutch in backwards.

Bluerghhhh