Results 1 to 6 of 6

Thread: Torque values

  1. 23rd July 2013, 06:17 PM #1
    Petetheprinta's Avatar
    Petetheprinta
    Petetheprinta is offline Master
    Join Date
    May 2013
    Location
    Adelaide
    Posts
    343
    Total Downloaded
    0

    Torque values

    Hi all,

    I have just replaced water pump and p gasket on my disco1 TDI. In retrospect I am not happy and I am going to start again before I put it all back together.
    As a result can someone confirm the torque values of the following. I have read what I can but the values are spread around the forum and are often differing.

    Water pump ...are all bolts torques the same or are the 3 long ones a little more due to metal P gasket (I read 24 and 30 nm?)

    Water pump pulley 3 bolts

    PAS pulley 3 bolts

    Serpentine Belt tensioner pulley (nut on stud) I have read everything from 14 to 45 nm?

    3 bolts holding aircon belt tensioner pulley

    Any other relevant nuts and bolts I have forgotten.

    Many thanks
    Reply With Quote Reply With Quote
  2. 23rd July 2013, 07:19 PM #2
    Don 130's Avatar
    Don 130
    Don 130 is offline ChatterBox Supporter
    Join Date
    Oct 2007
    Location
    Wantabadgery, N.S.W.
    Posts
    2,742
    Total Downloaded
    0
    You should be able to find all the relevant torque values by looking at the Defender workshop manual. After all, it's the same engine.

    http://www.landroverresource.com/doc...nual_96_on.pdf

    Don.
    Reply With Quote Reply With Quote
  3. 23rd July 2013, 07:33 PM #3
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,500
    Total Downloaded
    0
    all the pully bolts are 25nm same as the water pump bolts.

    apply loctite 243 to all of the threads

    apply loctite silver antiseize (51606 for the big tub and 37617 for the stick)to the shanks and the underside of the water pump bolts.

    the tensioner mounting stud winds in at 15nm and then has the nut applied to 45nm (use the 243 on the threads and the silver on the shank)

    the bolt on the pully on the tensioner from memory is 45nm.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  4. 23rd July 2013, 08:15 PM #4
    Petetheprinta's Avatar
    Petetheprinta
    Petetheprinta is offline Master
    Join Date
    May 2013
    Location
    Adelaide
    Posts
    343
    Total Downloaded
    0
    Quote Originally Posted by nod 130 View Post
    You should be able to find all the relevant torque values by looking at the Defender workshop manual. After all, it's the same engine.

    http://www.landroverresource.com/doc...nual_96_on.pdf

    Don.
    Thanks Don, I do have the Discovery workshop manual .pdf but it differs in many respects to my engine. Having a quick look, the Defender version is more like it. One obvious example the Disco book makes no mention of the auxiliary mounting bracket and P gasket. Thermostat housing is different etc etc. perhaps I need a newer book but it seems to be the only one available.
    Cheers
    Reply With Quote Reply With Quote
  5. 23rd July 2013, 10:22 PM #5
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,500
    Total Downloaded
    0
    grab a copy of the rave cd
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  6. 24th July 2013, 06:51 AM #6
    Petetheprinta's Avatar
    Petetheprinta
    Petetheprinta is offline Master
    Join Date
    May 2013
    Location
    Adelaide
    Posts
    343
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus View Post
    grab a copy of the rave cd

    I have them, but it covers from 95 up. There are obvious shortcomings when it comes to my 99 Disco, The ancillary bracket mentioned in previous post being one of them. I can find no mention of it in Disco manual, yet it is mentioned in Defender manual.
    Reply With Quote Reply With Quote
« Series 3 landy with 110 axel | Hard to shift OUT of reverse »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!