Results 1 to 6 of 6

Thread: Carling swith 4 pole wiring

  1. 5th September 2013, 08:22 AM #1
    TheEntertainer's Avatar
    TheEntertainer
    TheEntertainer is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    557
    Total Downloaded
    0

    Carling swith 4 pole wiring

    Hi all,

    If I want to connect the following switch to drive my work light what would be the best way to wire it up. It would be nice to have the light on when the work light is on.


    Attachment 65136

    Attachment 65137

    thanks all
    Last edited by TheEntertainer; 20th July 2016 at 08:33 AM.
    Reply With Quote Reply With Quote
  2. 5th September 2013, 09:09 AM #2
    TheEntertainer's Avatar
    TheEntertainer
    TheEntertainer is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    557
    Total Downloaded
    0
    I should add that my current config is on the earth wire and is inline. So i have live running to the work light and an earth running back to the switch connected to the bottom pole and the from the second pole from the bottom back to earth.

    Does that add up?
    Reply With Quote Reply With Quote
  3. 5th September 2013, 09:13 AM #3
    Benz's Avatar
    Benz
    Benz is offline Master
    Join Date
    Feb 2011
    Location
    Traveling Aus
    Posts
    639
    Total Downloaded
    0


    Wire your dash lights to the top two and power to the work light to the bottom two

    edit: the way your wiring it is called negative switching

    double edit:
    so dash light positive to top left and negative to the right top.
    (for positive switching) then live for light to middle left and power to light on the bottom left.
    (for negative switching) your earth from light will come back to the middle left and ground bottom left

    why do you want to switch it negatively?

    Triple edit:
    found this
    Reply With Quote Reply With Quote
  4. 5th September 2013, 09:21 AM #4
    TheEntertainer's Avatar
    TheEntertainer
    TheEntertainer is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    557
    Total Downloaded
    0
    Thanks heaps
    Reply With Quote Reply With Quote
  5. 5th September 2013, 11:14 AM #5
    TheEntertainer's Avatar
    TheEntertainer
    TheEntertainer is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    557
    Total Downloaded
    0
    Why negative switching, no real reason, just the way my outback style turned out as before i was using an on of switch. Thanks for the help just got to find the dash board light wiring int he defender now....?
    Reply With Quote Reply With Quote
  6. 5th September 2013, 08:42 PM #6
    TheEntertainer's Avatar
    TheEntertainer
    TheEntertainer is offline Master Subscriber
    Join Date
    Jan 1970
    Location
    Sydney
    Posts
    557
    Total Downloaded
    0

    The result look like this.

    Last edited by TheEntertainer; 20th July 2016 at 08:53 AM.
    Reply With Quote Reply With Quote
« New 300TDi Head Bolts what Grade and Markings? | 3D solidworks 130 tub »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!