Thread: 110 measurements help

hello to all 110 owners, new and old.

I require some measurements for some calcs im trying to do. I need these from stock vehicles. That is no spring lift, stock size tyres, no added bars or winch etc.

Parked on a firm flat surface, doesnt have to be perfectly level, but not too far from it please.

Height from ground to centre of wheel (centre of drive flange) and tyre size running

Height of the centre of the radius arm bush at chassis end ( it will be a little bit of a guess, but as long as you are eye level with it, should be close. The bushes are either side of a metal bush approx 26mm thick. Guess in the middle)

Bump stop gaps front and rear

thanks
Serg

2012 Defender stock 235/85 R16

Average of both sides
382mm from ground to center of wheel
406mm to Centre of radius arm bush at chassis.