Thread: A pressing solution

Had to replace a radius arm bush on my hybrid ute. As the suspension is a custom set up the radius arms use the lower trailing bush where the are fixed to the axle. So have in the past struggled a bit getting the new bush in. So made a mini press of sorts.

Pressing the bush in.

Bush in.
Had at first channel top and bottom but it was to light. The bottom channel has a ten by forty millimetre pate that the all thread screws into.
Works a treat.
Cheers Hall

3 link?

is the blue SHS a shock mount?

Yeah it is a three link and that is the shock mount.
Cheers Hall