Thread: FFR Perentie 24V alternator mout same as County A/C compressor?

I've only ever seen one (and that was just a brief look under the bonnet) but my recollection was that the 24V mount was completely different than the aircon compressor mounts I've seen.

Are you able to post a photo of the 24v alternator setup so that those with factory A/C compressor mounts can confirm? (mine is non-genuine fabricated mount)

Steve

The CAV Alternator is significantly different to the compressor mount, however there is no reason that you cant use the mountings and pulleys to make up a compressor mount.

The bands around the CAV alternator have a significantly greater diameter to the sanden type a/c compressor.

Originally Posted by dingsy

Hi All,


Does anyone know I the secondary 24V alt mount is the same as the county A/C compressor? I'm thinking of pulling out the alternator and trying to rig up some cold air. It's not even summer yet and I'm melting in my Survey panel van ( it doesn't have the tropical roof either).

I'm hoping to be able to use the same belts and idler pulley to achieve this.

Dingsy I am pretty sure the mount is the same item from FFR generator mount to County a/c mount. If you can measure yours up and post the measurements, I will check an original county a/c mount I have here and compare it. The belts, idler pulley and crankshaft pulley are the same.

Thanks everyone - I'll check on the weekend (it's currently living at my parents place) and get the measuring tape out. Thanks, the help is much appreciated.

Cheers,

Matt

Originally Posted by Bearman

Dingsy I am pretty sure the mount is the same item from FFR generator mount to County a/c mount. If you can measure yours up and post the measurements, I will check an original county a/c mount I have here and compare it. The belts, idler pulley and crankshaft pulley are the same.

I know that the IPV perenties had a different CAV mounting bands to the later production perenties, because we tried to fit a late bracket onto IPV7 and it didn't fit.

The idler etc are standard.

there also was an a/c and 24 volt bracket.often with a air compressor.
6X6.

Just source the izusu a/c brackets.......the ambos had a/c fitted

Goingbush had an interesting solution, he put a minibus air con evaporator on his Milford cargo barrier, check it out here, just before the caravan. Bob


www.goingbush.com/defender.html