Results 1 to 3 of 3

Thread: Removing top windscreen trim

  1. #1
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0

    Removing top windscreen trim

    Hi Guys.
    My windscreen is leaking worse than a Defender,both wind and water.
    Anybody got any tips on how to remove the top trim without damaging it after removing the side trims????
    I have the sika flex.
    Funnily enough the window in my grader is about to fall out,the sika-flex has failed and Im relying on gorrila tape to keep it in.Common denominator is the same company/fitter did both jobs
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  2. #2
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Nobody had to do one before????
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post

  3. #3
    Join Date
    Feb 2011
    Location
    Denmark Western Australia
    Posts
    594
    Total Downloaded
    0
    Hi Andy, I also had sika-flex fail on the disco for the 1st time last year ...so if you do get the trim off, I'd give it a real good clean with mineral turps or the like...and old timer trick I've used In the past is to dribble linseed oil under the seal and let it go off ..it goes quite sticky and then also stops further rust...Gary

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!