Results 1 to 4 of 4

Thread: TD5 running rough when cold

  1. 27th March 2014, 06:15 AM #1
    lyonsy
    lyonsy is offline Master
    Join Date
    May 2009
    Location
    wimmera
    Posts
    503
    Total Downloaded
    0

    TD5 running rough when cold

    Hi
    when cold just off idle at low throttle the engine runs a bit rough like it has a miss this is gone after probably a min or 2 of running and rarely happens if you have time to warm it up for 2/3mins before going, glow plugs test ok on nanocom, also once above about 1800rpm miss/rough running goes
    thanks
    mark
    Reply With Quote Reply With Quote
  2. 27th March 2014, 06:59 AM #2
    Disco W.A's Avatar
    Disco W.A
    Disco W.A is offline Master Gold Subscriber
    Join Date
    Dec 2008
    Location
    Beechboro Perth
    Posts
    447
    Total Downloaded
    0
    It,s most likely due to the fact that there are 5 cylinders but only 4 of them have glow plugs so the 5th cylinder takes a short time to get up to temperature.

    Roger
    Reply With Quote Reply With Quote
  3. 27th March 2014, 08:22 AM #3
    Disco Muppet's Avatar
    Disco Muppet
    Disco Muppet is offline Moderator Gold Subscriber
    Join Date
    Apr 2012
    Location
    Orange, NSW
    Posts
    7,965
    Total Downloaded
    0
    Only time mine has ever run rough was a really cold morning, sounded like a dying dog and shook like crazy. Disappeared very quickly.
    The Phantom - Oslo Blue 2001 Td5 SE.
    Half dead but will live again!

    Nina - Chawton White 2003 Td5 S
    Slowly being improved

    Quote Originally Posted by Judo View Post
    You worry me sometimes Muppet!!

    Reply With Quote Reply With Quote
  4. 27th March 2014, 11:06 AM #4
    lyonsy
    lyonsy is offline Master
    Join Date
    May 2009
    Location
    wimmera
    Posts
    503
    Total Downloaded
    0
    it doesn't vibrate etc. just has a miss sound and when under load it sort of does a slight chug once warm its fine.
    just the fact its doing it at temps above 10deg is why I am asking
    Reply With Quote Reply With Quote
« Question about AP60 cruise control or speed pulse generator | Transfer Case leaking »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!