Page 1 of 2 12 LastLast
Results 1 to 10 of 15

Thread: Maintenance Charge traxide/dual battery

  1. #1
    Join Date
    Aug 2012
    Location
    Perth
    Posts
    477
    Total Downloaded
    0

    Maintenance Charge traxide/dual battery

    As I don't use my landy everyday I was going to keep my batteries topped up with my charger. Question is should I charge the primary or secondary battery.

    With a normal isolator the answer would be primary but as the second battery can top up the primary I'm wondering which setup would be best.

  2. #2
    Join Date
    Feb 2009
    Location
    Mt Barker, SA
    Posts
    517
    Total Downloaded
    0
    With the Traxide the batteries are kept connected to a lower voltage than a 'normal' isolator I believe. Anyway, I just plug into the Anderson plug on the rear of the car while its in the shed and connect to a 20w solar panel on the roof - this keeps both batteries topped up via the Traxide isolator. The Traxide does not disconnect the batteries when you switch off the ignition. Here is a link to the battery maintenance system on my shed. The same would apply if you connect your battery charger to the secondary.

    Maintain battery by solar while in shed not used

  3. #3
    Join Date
    Aug 2012
    Location
    Perth
    Posts
    477
    Total Downloaded
    0
    Thanks Marty, to confirm your Anderson plug is just to the second battery. I think that's what you say in the other post but just want to confirm.

  4. #4
    Join Date
    Apr 2008
    Location
    Brisbane,some of the time.
    Posts
    13,890
    Total Downloaded
    0
    I have a plug for my charger wired in permanent to the main battery.Easy to do.I like it this way as convenient to plug in and the bonnet is open so the car will not be driven away accidentally.

    The charger charges both batteries,i have the Traxide SC80 i think it is.

    If the LED on the Traxide device is flashing(batteries isolated),and you charge the auxiliary battery,it may not charge the main battery,as the device uses the reference voltage from the main battery before it isolates the two batteries.

    Charging the main battery is the best way,as you know that is the way the system is designed.

  5. #5
    Join Date
    Feb 2009
    Location
    Mt Barker, SA
    Posts
    517
    Total Downloaded
    0
    Quote Originally Posted by Shakey View Post
    Thanks Marty, to confirm your Anderson plug is just to the second battery. I think that's what you say in the other post but just want to confirm.
    yep, just to the secondary.

  6. #6
    Join Date
    Feb 2010
    Location
    Townsville, QLD
    Posts
    2,581
    Total Downloaded
    0
    I charge mine via the main battery. The SC80 takes care of the aux battery.

    Cheers
    Keithy

  7. #7
    Join Date
    Feb 2009
    Location
    Mt Barker, SA
    Posts
    517
    Total Downloaded
    0
    from the Traxide website:

    "Again, with the unique way the SC80 operates you can connect solar panels ( via a solar regulator ) or a battery charger to either battery in an SC80 dual battery set up and all batteries will recharged. If you have an Anderson plug mounted at the back of your vehicle, you can make your solar or battery charger connection through the Anderson plug and again, all batteries in an SC80 dual battery set up will be charged."


    you can find it here at the bottom of the page:


    SC80 - 90 amps Standard Isolator | TRAXIDE - RV | Traxide - RV


    so basically you can charge via either battery - I just use the Anderson plug at the rear as its convenient for me

  8. #8
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    Quote Originally Posted by Marty110 View Post
    from the Traxide website:

    "Again, with the unique way the SC80 operates you can connect solar panels ( via a solar regulator ) or a battery charger to either battery in an SC80 dual battery set up and all batteries will recharged. If you have an Anderson plug mounted at the back of your vehicle, you can make your solar or battery charger connection through the Anderson plug and again, all batteries in an SC80 dual battery set up will be charged."


    you can find it here at the bottom of the page:


    SC80 - 90 amps Standard Isolator | TRAXIDE - RV | Traxide - RV


    so basically you can charge via either battery - I just use the Anderson plug at the rear as its convenient for me
    providing your start battery is at correct voltage i.e. LED is solid. if the start is low 'LED flashing' I do not believe it will receive charge from the AUX.....probably a rare event.

    oh I hook my charger up to the anderson plug at the rear of the car which comes off the AUX.....as my SC80 is mounted on the console i know straight away if the batteries are disconnected

  9. #9
    Join Date
    Feb 2009
    Location
    Mt Barker, SA
    Posts
    517
    Total Downloaded
    0
    Quote Originally Posted by weeds View Post
    providing your start battery is at correct voltage i.e. LED is solid. if the start is low 'LED flashing' I do not believe it will receive charge from the AUX.....probably a rare event.
    You're right Weeds, but as the disconnect is at 12.0volts it is unlikely that the batteries will be disconnected. I always plug my RRS in to the solar via the rear Anderson plug when I park it so the main battery should be no where near 12v. I dont wait for the battery to lose voltage before plugging in - there are advantages in doing this as once the charge is in float mode it can help with sulfation of the lead in the batery, another reason to use a solar regulator even with low capacity solar panels.

  10. #10
    Join Date
    Feb 2005
    Location
    Bracken Ridge - Brisbane - QLD
    Posts
    14,276
    Total Downloaded
    0
    Quote Originally Posted by Marty110 View Post
    You're right Weeds, but as the disconnect is at 12.0volts it is unlikely that the batteries will be disconnected. I always plug my RRS in to the solar via the rear Anderson plug when I park it so the main battery should be no where near 12v. I dont wait for the battery to lose voltage before plugging in - there are advantages in doing this as once the charge is in float mode it can help with sulfation of the lead in the batery, another reason to use a solar regulator even with low capacity solar panels.
    is the disconnect at 12V??? i thought it was high like 12.3/12.4

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!