Page 1 of 2 12 LastLast
Results 1 to 10 of 18

Thread: 300 Tdi Fuel Lift Pump

  1. #1
    Join Date
    Jul 2003
    Location
    Sydney's gritty inner west (2204) and verdant Mount Wilson
    Posts
    7,447
    Total Downloaded
    0

    300 Tdi Fuel Lift Pump

    Be aware.

    If you have to replace this item with the aftermarket spare made by Britparts it might not come with the compression "olives" so you will not be able to attach the inlet and outlet hoses. Ask when you order.
    Mahn England

    DEFENDER 110 D300 SE '23 (the S M E G)

    Ex DEFENDER 110 wagon '08 (the Kelvinator)
    http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html

    Ex 300Tdi Disco:



  2. #2
    Join Date
    Jan 1970
    Location
    Brisbane Australia
    Posts
    598
    Total Downloaded
    0
    I just did one on Dads because it cracked around one of pipes. M.R automotive sold him OME unit and gave him the olives and nuts at the same time, I think it was $110 or so.

  3. #3
    Join Date
    Jan 1970
    Location
    Baulkham Hills, but I would prefer to be bush......
    Posts
    92
    Total Downloaded
    0
    300tdi fuel pump in disco leaked around the compression seal for the diapragm, after I picked myself up off the floor with the price, I had a good look at the injector pump. This is the same VE bosch that we have on a tractor at my cousins property. Guess what?, it doesn't run a lift pump. So I have removed the lift pump altogether, used a piece of stainless steel as a blank off and rerouted the fuel line into a Fleetguard fuel filter with manual primer pump (uses CAV296 filter, $25 2nd hand). Runs like a charm and has done for the last 20 odd thou. So this begs the question, why did Land Rover put this fuel pump on, when it appears that it is not needed in the first place?? There is no loss in power, appears to get even better MPG and does not run out of fuel at maximum boost and revs. So dont't replace it, remove it!!!

  4. #4
    Join Date
    Jul 2003
    Location
    Sydney's gritty inner west (2204) and verdant Mount Wilson
    Posts
    7,447
    Total Downloaded
    0
    That's interesting.

    I guess once the system is primed it is self perpetuating.

    When this one fails I'll try the no replacement path. [img]style_emoticons/<#EMO_DIR#>/biggrin.gif[/img]

    Just a warning for those using an after market job. Make sure the shape of the unit doesn't interfere with the fuel lines from the injector pump to the head. It wont fit if it does. There are subtle differences between early and later model 300Tdi's.
    Mahn England

    DEFENDER 110 D300 SE '23 (the S M E G)

    Ex DEFENDER 110 wagon '08 (the Kelvinator)
    http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html

    Ex 300Tdi Disco:



  5. #5
    Join Date
    Jan 1970
    Location
    Hobart, Tasmania
    Posts
    58
    Total Downloaded
    0
    Very interesting, how does the lack of mechanical priming pump handle low fuel tank levels?? Or is gravity enough to let the feul through??

    If it works sounds like a good retro fit!

    Shifter.

  6. #6
    Join Date
    Jan 1970
    Location
    Now in Townsville!!
    Posts
    375
    Total Downloaded
    0
    Same thing happened on my brothers disco, cracked around the inlet on the pump, if you have to replace the pump, look at lengthening the line from the fuel filter to the pump. On the 96 disco the fuel filter is mounted on the firewall and the line to the lift pump (on the motor) is short and tight, putting stress on the fitting.

    So lengthen the line from the filter to the lift pump to stop it happening again!!

    Cheers

  7. #7
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Land Rover issued a modified hose under #WJP108350 for that problem. Seems to affect some cars more than others - most unusual for Land Rover [/sarcastic remark] :? .

    ***Just checked the price - $142 list :x . I think you'd be beter off having a hose made to suit.
    Scott

  8. #8
    Join Date
    Jan 1970
    Location
    Brisbane Australia
    Posts
    598
    Total Downloaded
    0
    Thats more than the pump.

  9. #9
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    Originally posted by shaunp
    Thats more than the pump.
    Would that be a surprise? :?

    Actually, if you bought the pump from LR, then the hose would be cheaper than the pump (by about $30) 8O .
    Scott

  10. #10
    Join Date
    Jan 1970
    Location
    Tregeagle, NSW
    Posts
    2,406
    Total Downloaded
    0

    300TDI lift pump

    That is interesting that the 'farm boy' made something difficult simple. My other 4wd is an old TDi (no engine oil leaks ) pajero,it is a simple system fuel tank to filter, filter to injector pump.The priming plunder is on top of the fuel filter and it is simple to prime the sytem and bleed the air ,if any, in the lines. Actually looking at both units the are almost the same. So I woud imagine if you want a primer, get an old pajero fuel filter from a wreckers or the like and replace it and you have a priming capability as well.
    As far as low fuel goes, I have driven mine up hill with low low fuel and all it did was cough till i got to level ground and a bowser. The injector pump is more than adeqate to suck fuel.

    john

Page 1 of 2 12 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!