Thread: Help me find an AC Condensor.

So I'm redesigning the cooling system in a classic rangie to fit a decent intercooler in.
I have the intercooler and radiator chosen and a space designed for them. Now I just need an AC condensor which is a nice fit in front of them.

The total space available is roughly 760mm wide by 360 tall.
But to give room to fit brackets, pipes etc and fit with the stuff behind a core of 600mm wide by 300mm high would be ideal. Can go wider with end-tanks and fittings up to that 760mm limit (80mm each side).

I want to take the pipes in/out at the bottom left hand corner (drivers perspective) where there is space and shortest/cleanest runs to the AC compressor, drier/filter and lines to the body.

Does anyone have any good options for me? I'll be buying new and considering either common vehicles or off-the-shelf universal fitments as long as I'll be able to buy another the same if a stick goes through it. It is very difficult to find suitable dimensions and also fitting details for OEM fitments.

Jilden, that catalogue is a gold-mine with several good options. Thanks again.

This is the best option I've found outside that catalogue: More Information for NISSENS 94255

It's from Rover 400 cars. The block type mounting may be quite easy. I can mill up a block that fits an O-ring seals while threading the other side of the ports to take hose fittings directly.