Reply With QuoteAbout which vehicle are you asking?
Fossicker
G'day all,
I want to remove the rear drivers side back seat. Is it as easy as it looks, just those two screws or are there hidden snags that I should know about. I want to be able to put them back later on. Cheers.
Major part of the heart and soul of AULRO.comAbout which vehicle are you asking?
Ron B.
VK2OTC
2003 L322 Range Rover Vogue 4.4 V8 Auto
2007 Yamaha XJR1300
Previous: 1983, 1986 RRC; 1995, 1996 P38A; 1995 Disco1; 1984 V8 County 110; Series IIA
RIP Bucko - Riding on Forever
Master
SubscriberMick. If Disco 1, Yes its as easy as it looks, just the screws holding the front pivot point. Other vehicles I cannot verify. My left seat is almost always out to allow a seat in the back with room on the left. Apparently, with the seat belt still in place it is regarded as a non-permanent removal and is no issue with technical requirements.
Fossicker
Sorry,
I'm talking about my D2 5 seater, thanks.
Master
not too difficult! be aware there are fairly strong springs attatched that you need to watch when refitting they can be a little difficult.
Trev.
Swaggie
easy as...mine go in and out several times a year
the weight of the seat holds the spring open.
they are quite heavy.....dont be afraid to ask for assistance getting them out.
dont bust your back
Swaggie
when I put the bolts back in I put a swivel eye on each side for tie down.Originally Posted by ramblingboy42
Fossicker
Thanks ramblingboy42. Could you tell me what a swivel eye is. Cheers.
Swaggie
SubscriberLook in each corner of your load area. They are swivel eyes of a sort.
Regards Philip A
Wizard
If you make up the tool for removal out of some 25 x 25 rhs its a piece of cake to remove the seat. Not need to worry about the springs and fighting them.
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks