Page 2 of 2 FirstFirst 12
Results 11 to 13 of 13

Thread: Something doesnt sound logical here

  1. #11
    Join Date
    Jul 2014
    Location
    west of Transylvania
    Posts
    3,783
    Total Downloaded
    0
    IMO if the fuel in the tank gets hot that should be sensed by the FT sensor though on the feed... and i've never seen a case when the FT reading to be higher than the ECT reading, which is generally valid cos it's stated in the diagnostic guides too about the FT sensor reading... i'm thinking now that a cause of some of the fuel pump failures is a hot running engine with very low fuel level in the tank cos there is the possibility to have 109*C ECT without even noticeing it as the gauge leaves the middle upwards only at 120*C and the electric cooing(aircon) fan provided it's not seized kicks in at 110*C to help cooling so the fuel will be ''cooled'' to 109*C and this return will heat up well the fuel in the tank if the level is very low and that's definitely not healthy for the pump
    Discovery Td5 (2000), manual, tuned

  2. #12
    Join Date
    Jul 2010
    Location
    Hunter Valley NSW
    Posts
    750
    Total Downloaded
    0
    I recorded these temp a while ago

    http://www.aulro.com/afvb/2048768-post43.html

    [/URL]

    FT is sensing fuel from tank see pic upper hole is inlet,
    brass bit is FT sensor.

    Regulated at head exit to 4 bar (lowest hole)

    Fuel in tank should not exceed 82c

  3. #13
    Join Date
    Jul 2014
    Location
    west of Transylvania
    Posts
    3,783
    Total Downloaded
    0
    Thank you very much... that is really relevant my dillema is solved now
    Discovery Td5 (2000), manual, tuned

Page 2 of 2 FirstFirst 12

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!