Rangie Dash Board Gauges

[LRHybrid100]

Finally got all my new gauges in and working the Volt metre most left is currently not connected till I get my dual battery set up:



These are Speco gauges - all 5 with senders / fitting kits cost me less than $200.

LRH

[seqfisho]

Where did you get them from LRH, especially the boost gauge :wink:

Glen

[LRHybrid100]

G'day Glen,

These were from my local Auto One store, but can get them through Repco / Autobarn / SupaCheap etc

full range of 2" gauges are here http://www.speco.com.au/gauges_am.html

I used all but the Boost gauge as electrical type.

VDO were much more expensive - think these are just a Taiwanese copy of VDO ones!!!

LRH

[weeds]

hey LRH

I'm considering a boost guage, i had a look at the web site in the post and they have 1-15 and 1-30, i have had my pump tweaked, would i be producing more than 15psi or will i have to purchase the 1-30.

[LRHybrid100]

mines a 30 PSI gauge - my motor currently only boosts to 14PSI, but will be increasing this to about 20 PSI once I have an exhaust temp gas gauge also

HTH

LRH

[one_iota]

And where will the EGT guage go? :wink:

[LRHybrid100]

in front of the now unused temp gauge on the original dash!!!

LRH