Results 1 to 3 of 3

Thread: 2.4 Puma Rough idle/Miss. Map Sensor? Injectors?

  1. #1
    Join Date
    Mar 2015
    Location
    Brisbane
    Posts
    18
    Total Downloaded
    0

    2.4 Puma Rough idle/Miss. Map Sensor? Injectors?

    Gday Gday,

    I've got a 2.4 puma 2011 and it seems to idle rough (only rely when cold). Its almost like a miss fire or like a much larger capacity engine "camming over".

    A few theories, one is the injectors are a bit sticky, could be, going to throw an injector cleaner in anyway and a 50mls of 2 stroke oil in the fuel on a full tank.

    Two, The oil that carries in on the EGR system into the intake has fowled up the map sensor. Im thinking most likely as there is a fair bit of oil through it. Looking at an EGR block and a catch can.

    Has anyone else experienced this? when it warms up it seems fine, but on first start up its quite ordinary.

    Any and all info would be great!
    Cheers

  2. #2
    Join Date
    Jun 2009
    Location
    Tangambalanga
    Posts
    7,558
    Total Downloaded
    0
    Try cleaning your MAF and MAP sensors first. Make sure you use a "sensor" cleaner, not just an electrical cleaner.

  3. #3
    Join Date
    Mar 2008
    Location
    Perth, WA
    Posts
    1,947
    Total Downloaded
    0
    Sounds like a PCV valve problem, if you do a google search for "Transit PCV Valve" there's plenty of info.

    HTH,

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!