https://www.aulro.com/afvb/images/im...017/05/172.jpg
Depth sethttps://www.aulro.com/afvb/images/im...017/05/173.jpg
Result
https://www.aulro.com/afvb/images/im...017/05/174.jpg
Consistent depth, cross fingers
Printable View
https://www.aulro.com/afvb/images/im...017/05/172.jpg
Depth sethttps://www.aulro.com/afvb/images/im...017/05/173.jpg
Result
https://www.aulro.com/afvb/images/im...017/05/174.jpg
Consistent depth, cross fingers
Back in feels smooth
Just have to get a new lock tab washer, I'm at the limit of reuse https://www.aulro.com/afvb/images/im...017/05/169.jpghttps://www.aulro.com/afvb/images/im...017/05/170.jpghttps://www.aulro.com/afvb/images/im...017/05/171.jpg
Count the teeth on your after market abs ring does it match the standard count ring teeth.
This has seen some issues with D2`s and after market abs rings with the wrong count of teeth not matching up[wink11]
It was working with the abs ring, the aftermarket part is the sensor.Quote:
Originally Posted by rangieman
Thanks for the heads up.
It will have to wait till midweek until I get a lock washer of Mario and use johntins nanocom .
What a great forum
Good to see your looking after my old Defender !!
PS thats not my botch job - Sals was in when I bought it !!
Looks like you're on to something. I'm around pretty much all week, so give me a shout when you want to plug in the nano.
Maybe someone else on here may put their hand up. Re the Sals.Quote:
Originally Posted by goingbush
When nanocom will be connected read stationary live inputs from the sensors...they all should be equal between 2 - 2.4V, if the reading of the new one is different than the other 3 even though withing the accepted range the TC will kick in at a time without other reason, unfortunately they made the system too sensotive so any missballance can cause issues
I'm thinking Ivan ClarkeQuote:
Originally Posted by fitzy
May Mr Ivan Clarke please come up and accept your awardQuote:
Originally Posted by goingbush