Results 1 to 3 of 3

Thread: Fuel Pressure Regulator Td5

  1. 24th January 2006, 09:50 PM #1
    Jojo's Avatar
    Jojo
    Jojo is offline Wizard Subscriber
    Join Date
    Jan 1970
    Location
    Somewhat North of Cape York...
    Posts
    1,348
    Total Downloaded
    0

    Fuel Pressure Regulator Td5

    Hi mates!
    On behalf of a friend of mine a tricky question:
    The fuel pressure regulator on a Td5 engine (the device is located very awkwardly on the back of the engine block) is leaking. According to the manual it is secured in position by a circlip and where it mounts to the housing there should be some O-rings or gaskets.
    Now, does anyone of you have an idea about the type and size of these rings and if they are standard size before we try to remove the whole thing just to find out we have to get hold of special replacement parts???

    Suggestions welcome!
    Cheers
    Johannes

    There are people who spend all weekend cleaning the car.
    And there are people who drive Discovery.
    Reply With Quote Reply With Quote
  2. 25th January 2006, 07:24 AM #2
    stevo's Avatar
    stevo
    stevo is offline Wizard Supporter
    Join Date
    Jan 1970
    Location
    Pennant Hills, Sydney
    Posts
    1,415
    Total Downloaded
    0
    is this on an early TD5 the whole housing is changed and completely
    different from the old one apparently the gasket leaks as well.

    a new regulator will cost around $300 (not from main stealer) the fuel lines are easy to disconnect as they are quick release the three bolts are a bit of a pain to get to,make sure it is very clean around the regulator
    before removing it.

    you do not want to get any dirt in the fuel system allow around 1 hour for the job.
    disco seriesII mods so far:-bullbar,hyd winch,
    detriot locker,lsd front,C.D.L kit,chipped and bigger intercooler,2" lift,rock sliders, lsd in transfer case, modified auto trans.

    In the event of nuclear war,Disregard this message
    Reply With Quote Reply With Quote
  3. 25th January 2006, 10:29 AM #3
    johnv Guest
    I agree with the other reply post. You can't buy the regulator. You have to buy the whol fuel block into which the regulator sits.

    The regulator its self is not to difficult to remove from the fuel block once you have the block off

    I tried to purchase just the regulator, but no luck.
    Reply With Quote Reply With Quote
« No fuel... no go!?! | replacement (truck?) rear lights for a defender 130? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!