Thread: Handbrake

<span style="color:blue">oops...i thought you meant....err....the lever....yes!!


unclip the base of the boot.....and lift it up to expose the the cable....
remove the clip that holds the pin in then with the handbrake released....remove the pin and the cable comes out....

then you just unscrew the base plate of the lever assembly.....
and remove the whole lot in one go......
but im not sure if the centre console needs to come out for this step...

i cant remember..... ops: </span>

it is a pox of an arrangement funnily enough

mine sticks ocassionally.

had little trouble getting it out, getting it sorted was/is another story.

you tried some lanolin or oil down the side of the button?

<span style="color:blue">better still.....give me an email address or send me an email.....

i got what you need.....</span>

<span style="color:blue">dust gets in them or the spring breaks....</span>

Thanks for the replies guys, I've undone the cable gotten to the point of removing the lever, the trouble is the base looks to be welded on, not bolted :?
I'll try a little oil down there, it's stuck a couple of times in the past, but usually a few knocks on the lever saw it come out again and operate trouble free for quite a while.

<span style="color:blue">sometimes when you force the button it bends the rod which runs to the ratchet...
inside the handle....
or the ratchet assembly bends....

it may just need adjusting.......



once you have it out you will be able to see how it works and where the problem lies....</span>

Mine sticks every now & then but a few twists of the handbrake grip soon pops it back out