Thread: Dash pod pull off in Defender

In a word - Yup.

I'm guessing you have a post '02 fender?

There are:
- 2 screws in wach of the windscreen vents.
- 3 large screws on top or sill.
- 2 screws to remove passanger OMG bar (one is under LR badge)
- about 3 on the drivers side to remove (or loosen) end plate of instrument console.

You need to do all this to get at the 3 screws on top of the radio console/pod.

You might want to get a couple of offset or flexible philips drivers as well, cause the screws around the window are a ******e to remove with normal drivers.

Cheers,

GODDAMMIT

<span style="color:blue">what year defender....?

i will have a pick for you in a few minutes....
ive been struggling with it for the last 15mins....but not defeated..... </span>

finally got it.....hope it helps....

03 model, that will definitely help, thanks Zook.

Forgot to ask , where do you get all them neat drawings from??

he stole them from landrover when he worked there!
wish this post was up LAST weekend! took me a while to get
the dash out of the 90! just to put the UHF in! in the end i ran the aerial
wire through the bonnet cable gromet???
WHERE ARE ALL THE HOLES IN THE FIREWALL!!!!!

flamin disco had heaps!

phil

pull the drivers instrument console out while you have the dash apart...some good access grommets in there..