Fossicker
I often get a fault on the nanocom saying either the front left or right ABS sensor has a fault but as Ive learnt from the past its the yellow plug on the ABS ECU has corrosion on the one of the two wire for both sensors. Ive been looking everywhere to try and fined the a new plug or even the clips on the individual wires but have had no luck. Does anyone have any experience getting these parts?
ChatterBox
Not sure what vehicle but most dealers have a big box of connectors that come from Land Rover
They should be able to supply you with what you need although it likely their eyes will glaze over when you ask.
Also might be good to use some connector grease when you reassemble as this should help with the issue in the future
ChatterBox
You can disassemble the plug and clean the pins.
Moderator
And on that note I've never had that plug apart but have had to repair plenty of electrical and electronic connections over the years and Scotchbrite plus contact cleaner is your friend.Originally Posted by strangy
Posting Permissions
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Reply With Quote
Bookmarks