Thread: Springz n other things done to death

Hi Phil
How much did they set you back???
What shocks are you using???
Andrew

Originally posted by Sith
I wouldn't give ARB the pleasure of ripping me off .
Will have a ring around and see if any of the suspensions shops have them .thanx for that


Andy took mine out to Mundaring today for a run up n down rutts and washouts , came home remeasured .............5mm down on every corner

<span style="color:indigo">go to your nearest $2 shop and buy a nylon cutting board.....
then all you need is a compass(to draw circles)....
and a jig saw (to cut them out with.....)....
remember not to use your best blades when cutting nylon....
it will blunt them....</span>

<span style="color:green">forgot to add....cutting boards come in different thicknesses.....
and if you need thicker still....insert a spacer on the top and bottom of the spring....</span>

I like the cutting board idea. Makes sense, look at how long they last. We use a similar nylon in ore transfer chutes, a bit thicker than most cutting boards. Don't see many off cuts, but if I do they will be going in my shed.

I would have thought by now most spring makers would be aware of the different sized front springs in Rangies and compensate for that.

Sith, 300tdi RR, mmm. Geez I miss my Rangie. Might have to steal it back off the old man, If I can get my brother out of it.
Now one with a TD5, that would be interesting. Big job with the drive by wire though.