Results 1 to 4 of 4

Thread: under the D2--

  1. 7th May 2006, 08:25 AM #1
    Pedro_The_Swift's Avatar
    Pedro_The_Swift
    Pedro_The_Swift is offline The MOD Father
    Join Date
    May 2003
    Location
    On The Road
    Posts
    30,032
    Total Downloaded
    0

    under the D2--

    had to do my first oil change on the new green machine,,
    everything nice and oil free!!!
    (makes a change :roll: )

    just in front of the filter is a small plastic splash guard, which I took off to allow easier filter removal,,

    when it came time to replace the guard I did the centre self tappers up first then looked at the sides---

    hmmm, not a great fit, seems to be a big lip at the ends,,
    no wonder one of the end screws was missing,,
    but if I turn the guard upside down--
    the nice washer indents will be raised bulges????

    am I missing something here?
    "How long since you've visited The Good Oil?"

    '93 V8 Rossi
    '97 to '07. sold.
    '01 V8 D2
    '06 to 10. written off.
    '03 4.6 V8 HSE D2a with Tornado ECM
    '10 to '21
    '16.5 RRS SDV8
    '21 to Infinity and Beyond!

    1988 Isuzu Bus. V10 15L NA Diesel
    Home is where you park it..

    [IMG][/IMG]
    Reply With Quote Reply With Quote
  2. 7th May 2006, 10:16 AM #2
    DEFENDERZOOK's Avatar
    DEFENDERZOOK
    DEFENDERZOOK is offline OldBushie
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    <span style="color:blue">dunno...you just confused me......

    bring it round and i will look at for you if you like.....

    or just take a couple of pics.....but with those things its best not to tighten
    anything till all screws are in place.....


    i used to make a cut out in them under the oil filter....
    this allowed the oil filter to be changed without having to remove the tray....
    and without making a mess all over the tray......

    then the boss found out and got a bit upset with me..... ops: </span>
    Reply With Quote Reply With Quote
  3. 7th May 2006, 05:15 PM #3
    disco95 Guest
    [quote=DEFENDERZOOK]<span style="color:blue">dunno...you just confused me......

    bring it round and i will look at for you if you like.....

    or just take a couple of pics.....but with those things its best not to tighten
    anything till all screws are in place.....


    i used to make a cut out in them under the oil filter....
    this allowed the oil filter to be changed without having to remove the tray....
    and without making a mess all over the tray......

    then the boss found out and got a bit upset with me..... ops: </span>


    That'll learn ya' for being lazy :wink:
    Reply With Quote Reply With Quote
  4. 7th May 2006, 07:08 PM #4
    DEFENDERZOOK's Avatar
    DEFENDERZOOK
    DEFENDERZOOK is offline OldBushie
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    <span style="color:blue">lazy....?

    it took more effort to find the saw and cut the hole than to remove a few screws...
    the time saved was on the next service......</span>
    Reply With Quote Reply With Quote
« What you can do with a hacksaw... | Bio diesel - is it drying up? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!