Results 1 to 5 of 5

Thread: Leaking clutch fulid

  1. #1
    JONEZY Guest

    Leaking clutch fulid

    I replaced my master cylinder on my 200 tdi Defender Ute about a month ago and all was well until… I did the ligaments in my knee and didn’t drive the fender for a few weeks. Then when I tried to drive it there was no pressure when I went to push the clutch in.
    So I checked the fluid level in the reservoir and it was empty. So I filled it up and bled the system, started it up and drip drip drip. Iv checked over the master cylinder and the pipe going into the slave cylinder and cant find and sign of a leak.

    Has this happened to any one else?? Any help would be appreciated .

  2. #2
    Join Date
    Jan 1970
    Location
    Ferntree Gully VIC
    Posts
    10,362
    Total Downloaded
    0
    mine leaks down my clutch pedal
    130's rule

  3. #3
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    234
    Total Downloaded
    0
    hi you said drip drip drip, where from?
    Might be leaking into the bell housing via the slave, have you got fluid coming from the hole in the bottom of the bellhousing or have you got the wading bung in.?
    cheers
    Richard

  4. #4
    JONEZY Guest
    The dipping is coming from around bottom of the bell housing , I think the wading bung is in ??

  5. #5
    Join Date
    Jan 1970
    Location
    Perth
    Posts
    234
    Total Downloaded
    0
    Hi sounds like slave cylinder leaking.
    Cheers
    Richard

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!