Page 1 of 2 12 LastLast
Results 1 to 10 of 20

Thread: LT230 spud shaft manufacture

  1. 6th February 2021, 09:57 PM #1
    derangedrover Guest

    LT230 spud shaft manufacture

    Gday gents.

    Im in the midst of a project mating an LT230 to a Merc 722.6 auto.
    I have finished the adapter plates and need a spud shaft.
    My intention was to find a machine shop to respline the female end of a ZF spud shaft to suit, but I’m having trouble finding someone who will tackle the job.
    I have had a quote to manufacture the required shaft that came in at ~ $1700, not what I was expecting.....
    I know there is an adapter and shaft available from onlinegearbox, however it isn’t for the output shaft in my box and the adapter is longer than I want.

    If anyone has accomplished similar or knows a shop in Vic. that would respline an existing spud shaft please let me know.

    Cheers
    D
    Reply With Quote Reply With Quote
  2. 6th February 2021, 10:40 PM #2
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,497
    Total Downloaded
    0
    Gear Cutting Sunshine, Melbourne, Victoria, Australia- Sunshine Gears

    try these guys
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 7th February 2021, 12:26 AM #3
    Red90
    Red90 is offline Wizard
    Join Date
    Mar 2007
    Location
    Canada
    Posts
    1,028
    Total Downloaded
    0
    $1700 sounds about right for a one off custom shaft built with the correct materials and properly hardened.
    Reply With Quote Reply With Quote
  4. 7th February 2021, 12:40 AM #4
    cjc_td5's Avatar
    cjc_td5
    cjc_td5 is offline ChatterBox
    Join Date
    Aug 2007
    Location
    Bunbury, WA
    Posts
    2,507
    Total Downloaded
    0
    Does the merc gearbox have a flanged output? Could you use a Rakeway flanged input shaft in to the LT230 box?

    off road race transfer box motorsport
    Reply With Quote Reply With Quote
  5. 7th February 2021, 08:51 AM #5
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Some pics of where your at would be good
    Reply With Quote Reply With Quote
  6. 7th February 2021, 09:21 AM #6
    Homestar's Avatar
    Homestar
    Homestar is offline Super Moderator & CA manager Subscriber
    Join Date
    Aug 2010
    Location
    Sunbury, VIC
    Posts
    20,105
    Total Downloaded
    0
    Try Coljen gear cutting in Heidelberg - they are happy to take on one off stuff and do good work. Word of warning - they are a production shop so one offs can take a while - I had some steering shafts resplined by them - took a while, but I wasn’t in a rush. Nice people, easy to deal with.


    https://www.yellowpages.com.au/vic/h...1-listing.html
    If you need to contact me please email homestarrunnerau@gmail.com - thanks - Gav.
    Reply With Quote Reply With Quote
  7. 7th February 2021, 10:29 AM #7
    Vern's Avatar
    Vern
    Vern is offline OldBushie
    Join Date
    May 2006
    Location
    Woolgoolga
    Posts
    7,870
    Total Downloaded
    0
    Or McNamara Diffs
    Reply With Quote Reply With Quote
  8. 7th February 2021, 08:44 PM #8
    Don 130's Avatar
    Don 130
    Don 130 is offline ChatterBox Supporter
    Join Date
    Oct 2007
    Location
    Wantabadgery, N.S.W.
    Posts
    2,742
    Total Downloaded
    0
    Quote Originally Posted by derangedrover View Post
    Gday gents.

    Im in the midst of a project mating an LT230 to a Merc 722.6 auto.
    I have finished the adapter plates and need a spud shaft.
    My intention was to find a machine shop to respline the female end of a ZF spud shaft to suit, but I’m having trouble finding someone who will tackle the job.
    I have had a quote to manufacture the required shaft that came in at ~ $1700, not what I was expecting.....
    I know there is an adapter and shaft available from onlinegearbox, however it isn’t for the output shaft in my box and the adapter is longer than I want.

    If anyone has accomplished similar or knows a shop in Vic. that would respline an existing spud shaft please let me know.

    Cheers
    D
    I'm curious. May I enquire what's in front of the Merc 722.6 auto?

    Don.
    Reply With Quote Reply With Quote
  9. 8th February 2021, 06:37 AM #9
    Nick S's Avatar
    Nick S
    Nick S is offline Master Silver Subscriber
    Join Date
    May 2007
    Location
    Melbourne
    Posts
    459
    Total Downloaded
    0

    This is one I got Rakeway to make to join a ML722.6 to an LT230. I also got them to re-spline the input gear on the TC
    Reply With Quote Reply With Quote
  10. 8th February 2021, 06:38 AM #10
    Nick S's Avatar
    Nick S
    Nick S is offline Master Silver Subscriber
    Join Date
    May 2007
    Location
    Melbourne
    Posts
    459
    Total Downloaded
    0

    Adaptor
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« 300 TDi head cracks. | Coolant slow leaks »

Tags for this Thread

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!