Page 2 of 3 FirstFirst 123 LastLast
Results 11 to 20 of 30

Thread: Soft Pedal

  1. #11
    Join Date
    Jan 1970
    Location
    Eidsvold QLD
    Posts
    2,691
    Total Downloaded
    0
    Quote Originally Posted by cameron
    Hi Tombraider,
    Any advice on where to get some of these stainless lines and any idea of what level on 'investment' it involves?

    Thanks,
    Cameron
    I can tell you it was about $600 for my Guzzi.
    Also had this exact same thing on a current model Falcon since new.

  2. #12
    Join Date
    Jan 1970
    Location
    NSW far north coast
    Posts
    17,285
    Total Downloaded
    0
    Quote Originally Posted by tombraider
    Yes, and yes

    And with the 315s braking is still as good if not better than standard.

    Tombraider
    and a double yes here as well.
    The increase in firmness and pedal feel is excellent. Work nicely with slotted rotors as well

    Remember that to be road legal they have to used crimped ends and be ADR approved (which involves a piece of flexible cover over the ends to pass the infamous 'whip' test). Specialist brake shops can often either make or source them.
    Weird thing is that race cars use self assembled olive compression fittings which are stronger, when assembled properly, yet aren't legal for the road.....

  3. #13
    Join Date
    Jan 1970
    Location
    Wodonga
    Posts
    1,304
    Total Downloaded
    0
    Quote Originally Posted by meteor
    I'm not sure 1000m would be enough elevation to cause this, but driving at altitude has the habit of cooking brakes much quicker than sea level, the lower pressures decrease the boiling point of the fluid so they aren't going to cop much before giving up the ghost. Same goes for auto transmission fluid. Wiper fluid should be safe though
    The altitude should not be enough to affect the brakes.
    When I lived in Switzerland I was driving everyday above 1000m and up to 3000 at times. Never had a problem. Although if at altitude you must be a lot more careful and strict in your maintenance program. New fluid in the brakes every year, etc etc.

    As for the wiper fluid, just pour some isopropylolic alcohol into the reservoir that will stop it from freezing. If you cannot get ISO alcohol just use metho, not as good but it will do.

  4. #14
    Join Date
    Apr 2002
    Location
    Godwin Beach 4511
    Posts
    20,766
    Total Downloaded
    32.43 MB
    Quote Originally Posted by gruntfuttock
    If you cannot get ISO alcohol just use metho, not as good but it will do.
    is fine with rasberry cordial :P
    2007 Discovery 3 SE7 TDV6 2.7
    2012 SZ Territory TX 2.7 TDCi

    "Make the lie big, make it simple, keep saying it, and eventually they will believe it." -- a warning from Adolf Hitler
    "If you don't have a sense of humour, you probably don't have any sense at all!" -- a wise observation by someone else
    'If everyone colludes in believing that war is the norm, nobody will recognize the imperative of peace." -- Anne Deveson
    “What you leave behind is not what is engraved in stone monuments, but what is woven into the lives of others.” - Pericles
    "We can ignore reality, but we cannot ignore the consequences of ignoring reality.” – Ayn Rand
    "The happiness of your life depends upon the quality of your thoughts." Marcus Aurelius

  5. #15
    Join Date
    Jan 1970
    Location
    Kurrajong Heights NSW
    Posts
    192
    Total Downloaded
    0
    Have seen Goodrigde stainless brake line kits on Ebay for Defender in UK.
    Would these be OK?

  6. #16
    Join Date
    Jul 2003
    Location
    Sydney's gritty inner west (2204) and verdant Mount Wilson
    Posts
    7,490
    Total Downloaded
    0


    Can (or properly "may") I interject here?

    It's a diesel so I don't have to use the brakes ( or breaks Tony)

    Apart from SS brake lines and raspberry cordial spiked with methanol...

    If I have forced fluid back through the system whilst fitting the rear pads will this have affected the seals in the MC?

    Will this mean a complete new MC or just a refurb kit?

    The brakes are just dandy now Altitude is merely a concidence maybe...but for how long?
    Last edited by one_iota; 10th July 2006 at 10:07 AM.
    Mahn England

    DEFENDER 110 D300 SE '23 (the S M E G)

    Ex DEFENDER 110 wagon '08 (the Kelvinator)
    http://www.aulro.com/afvb/members-rides/105691-one_iotas-110-inch-kelvinator.html

    Ex 300Tdi Disco:



  7. #17
    Join Date
    Jan 1970
    Location
    Free Again Thanks Dan
    Posts
    10,150
    Total Downloaded
    0
    funny thing about this i had the same problem a few weeks ago in the high country

    and when i returned to the low country the pedal came back higher

    strange or a rover thing

  8. #18
    Join Date
    Jan 1970
    Location
    Toowoomba QLD.
    Posts
    1,179
    Total Downloaded
    0
    Is it possible that its a vacuum pump issue at altitude with the diesels? It may prevent the full vacuum from being generated. If possible fit a gauge in the vac line and check it at sea level then altitude.

    Trev.

  9. #19
    Join Date
    Jan 1970
    Location
    SYDNEY -in the shire.....
    Posts
    8,196
    Total Downloaded
    0
    guys....are we talking stainless steel lines...or braided hoses.....?

    if its braided hoses...then yes it will make a difference as the pressure from your foot goes
    to the brake pads.......
    with normal hoses.....the pressure will expand the hoses which take some of the firmness and feel away.....
    great for race cars.....not so sure if it is really needed on road though.....

  10. #20
    tombraider Guest
    Quote Originally Posted by DEFENDERZOOK
    guys....are we talking stainless steel lines...or braided hoses.....?

    if its braided hoses...then yes it will make a difference as the pressure from your foot goes
    to the brake pads.......
    with normal hoses.....the pressure will expand the hoses which take some of the firmness and feel away.....
    great for race cars.....not so sure if it is really needed on road though.....
    Makes a remarkable difference to a Landys brake feel on and offroad.
    So I'd say its worth it.

    Tombraider

Page 2 of 3 FirstFirst 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!