Reply With QuoteThose wheels are 53 offset, RRS 8.5"rims are 47 offset. I'd be concerned that they would foul the upper control arm as per this link Wheel Offset | Range Rovers Forum The wheels in that link are 9.5"inch though not 8.5"
Regards,
Tote
Swaggie
Hi all, would anybody know any of the following info regarding the Disco4 Style 104 20x8.5" wheel by any chance?
1. If it will fit over the 380mm Brembo 6pot brakes on the Range Rover Sport
2. What the load rating is?
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
ForumSage
SubscriberThose wheels are 53 offset, RRS 8.5"rims are 47 offset. I'd be concerned that they would foul the upper control arm as per this link Wheel Offset | Range Rovers Forum The wheels in that link are 9.5"inch though not 8.5"
Regards,
Tote
Go home, your igloo is on fire....
2014 Chile Red L494 RRS Autobiography Supercharged
MY2016 Aintree Green Defender 130 Cab Chassis
1957 Series 1 107 ute - In pieces
1974 F250 Highboy - Very rusty project
Assorted Falcons and Jeeps.....
Swaggie
Thats really interesting, I didn't realise there was that incompatibility also. Thanks for this Tote!Originally Posted by Tote
From watching this video (I've just found it), I'm gathering that the the 380mm Brembo brakes will fit behind the 20" Discovery rims when fitted to a Disco3/4
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
Swaggie
Even Disco 19" rims fit over those brakes which are the same as on my L322, currently wearing 255/60R19 on D4 rims.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
ForumSage
SubscriberThe 20" RRS wheels fit over the 380mm brembos on my RRS with no problems, I have a set in the shed I can take a picture of the markings on the back of them if that's helpful.
Regards,
Tote
Go home, your igloo is on fire....
2014 Chile Red L494 RRS Autobiography Supercharged
MY2016 Aintree Green Defender 130 Cab Chassis
1957 Series 1 107 ute - In pieces
1974 F250 Highboy - Very rusty project
Assorted Falcons and Jeeps.....
Swaggie
Hey Graeme, are they are L322 6pot Brembos with D4 rims? That is actually exactly what I really was trying to find out! Thanks very much! The L322 Brembos are offset slightly differently to the rest.
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
Swaggie
Thanks Tote. Thats perfect as well, thanks very much for this! Greatly appreciated too. No need to take a pic
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
Swaggie
Yes, L322 6-pot Brembos allow fitment of any 19" D4 rim and therefore any D4 20" rim. L322 offset is normally +57. I initially had my old 2010 D4 19" rims fitted and now have MY15/16 7-spoke rims. A good 3mm clearance exists between the callipers and the rim.
The 6-pot Brembos were optional on UK D4s.
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Swaggie
MY21.5 L405 D350 Vogue SE with 19s. Produce LLAMS for LR/RR, Jeep GC/Dodge Ram
VK2HFG and APRS W1 digi, RTK base station using LoRa
Swaggie
Thats really interesting, thanks so much for this! For the caliper clearance, is that to the face of the rim or the actual rim of the rim. Never the less the fit sounds like it is good. What makes this also interesting in terms of the fitment is that the L322 380mm rotor is offset abut 20mm further inboard (away from the rim face) that the other 380mm rotors used on the other vehicles like the RR L405, RRS L494 and Disco5 and they seem to bolt across to the Disco3/4 which also matches what you're saying about them being an optional fit in the UK.
Those brakes fill that wheel really well!!!
Cheers
Slunnie
~ Discovery II Td5 ~ Discovery 3dr V8 ~ Series IIa 6cyl ute ~ Series II V8 ute ~
| Search AULRO.com ONLY! |
Search All the Web! |
|---|
|
|
|
Bookmarks