Thread: Edging strip for thin masonite panels

Bunnings sell a product called "Wallart" which is about 3mm thick plastic sheeting. Not that you need that, but they also sell the edging that goes with it. This should be suitable for your purpose. Another option is pinchweld (supercheap?) or moulded rubber (Clarke Rubber).

Originally Posted by reefmagnet

Bunnings sell a product called "Wallart" which is about 3mm thick plastic sheeting. Not that you need that, but they also sell the edging that goes with it. This should be suitable for your purpose. Another option is pinchweld (supercheap?) or moulded rubber (Clarke Rubber).

Thanks, I'll have a look in Bunnings.
As I need off-white the pinchweld or moulded rubber isn't suitable.

Colin

Found the edging strip but not the joining strip on the way to work. Seems Bunnings may be getting out of the product.
Much wider than the original so I'll have to 'V' the back to get it to bend.

I'll keep looking but if I can't find anything this will suffice.

Thanks,


Colin

Originally Posted by gromit

Found the edging strip but not the joining strip on the way to work. Seems Bunnings may be getting out of the product.
Much wider than the original so I'll have to 'V' the back to get it to bend.

I'll keep looking but if I can't find anything this will suffice.

Thanks,


Colin

Your best bet at bunnings would be eaveslining joiners, it's 4.5mm though so a little bigger than your Masonite but would still work. You may find smaller at a plywood/partical board supplier. They would most likely stock a 3-3.5mm product to suit caravan plywood.
James Hardie 2400 x 4.5mm PVC Straight Jointer - Bunnings Australia
Cheers Jim

Or search for "Lamipanel joining strip"

Don.