2 inch body lift on a disco 1

I thought I read somewhere the Disco's steering column will not accomodate a 2" lift (whereas Rangies' will) but I could be mistaken.
Don't forget to post the photos as you do it! :)

Disco steering column will accomodate a 2" body lift.

For 32's I'd never bother, waste of time. Stick with 7" rims and the Camel Cut.

Poly block lifts are bloody dangerous and should be banned on ALL 4wds.

Std bolts, increased sheering and twisting forces of body lifts do not suit Elastomeric lifts.

Welded mounts are the only secure way to body lift.

Nissan/Toyota drivers have no idea :wasntme:

I had an engineered (LRA) 2" lift and 2" springs with Flares...

Easily ran 35's.

Ran 32's on std OME coils no problems.

Tombraider

Just watch the front driveshaft in your Dsico 1, as it will bind with a 2" lift.

You'll need an earlier RR shaft or a later D2 drive shaft.

Quote:

---

Originally Posted by up2nogood

Just watch the front driveshaft in your Dsico 1, as it will bind with a 2" lift.

---

Not with a body lift it won't.

This thread went so long I thought we were talking suspension. :D

Quote:

---

Originally Posted by up2nogood

This thread went so long I thought we were talking suspension. :D

---

Quote:

---

HI,
I have a disco 1, and i have already put a 2" spring lift in it.

---

:)

It's all good
Dan