Results 1 to 10 of 10

Thread: Series Transfer Cases?

  1. 12th November 2006, 05:04 PM #1
    George130's Avatar
    George130
    George130 is offline ForumSage
    Join Date
    Jan 1970
    Location
    Yass NSW
    Posts
    7,239
    Total Downloaded
    0

    Series Transfer Cases?

    If anyone reads this in the next hour where is the bolt for putting oil in the transfer case of a series 2a. I have one stopping by in 45 mins to an hour for a top up.
    Thanks in advance.
    Reply With Quote Reply With Quote
  2. 12th November 2006, 05:08 PM #2
    justinc's Avatar
    justinc
    justinc is offline Swaggie Vendor
    Join Date
    Aug 2006
    Location
    Kingston, Tassie, OZ.
    Posts
    13,728
    Total Downloaded
    0
    Hi Edd,

    I think it is at the rear of the case, next to the park brake, like the LT 230. I think.(!) I should remember this, but I haven't worked on one for a while!!

    JC
    Reply With Quote Reply With Quote
  3. 12th November 2006, 05:12 PM #3
    George130's Avatar
    George130
    George130 is offline ForumSage
    Join Date
    Jan 1970
    Location
    Yass NSW
    Posts
    7,239
    Total Downloaded
    0
    Thans. I will find out shortly.
    Reply With Quote Reply With Quote
  4. 12th November 2006, 05:13 PM #4
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Yep,back of the transfercase,you cant miss it.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  5. 12th November 2006, 05:35 PM #5
    crossy Guest
    Quote Originally Posted by George130
    If anyone reads this in the next hour where is the bolt for putting oil in the transfer case of a series 2a. I have one stopping by in 45 mins to an hour for a top up.
    Thanks in advance.
    bet ya 100 internet bucks it's overfull anyway.
    Reply With Quote Reply With Quote
  6. 12th November 2006, 05:40 PM #6
    George130's Avatar
    George130
    George130 is offline ForumSage
    Join Date
    Jan 1970
    Location
    Yass NSW
    Posts
    7,239
    Total Downloaded
    0
    Quote Originally Posted by crossy
    bet ya 100 internet bucks it's overfull anyway.
    Probably. Since I have no idea whats in it if it does need more what should we be putting in it?
    Reply With Quote Reply With Quote
  7. 12th November 2006, 05:42 PM #7
    crossy Guest
    gl4 or gl5 spec stuff as long as it is safe for brass ?

    everyone says to use ep 90 - but i've never been able to find it.

    If it is overfull - top up the gearbox as that is where the excess oil came from.
    Reply With Quote Reply With Quote
  8. 12th November 2006, 07:11 PM #8
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,523
    Total Downloaded
    0
    It won't worry too much what sort of oil you put into it - EP90 is specified, but in fact as long as it is clean oil it will be happy. There is no synchromesh and no other critical components and it is not highly stressed.
    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
  9. 12th November 2006, 08:13 PM #9
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,503
    Total Downloaded
    0
    I do mine the lazy way..

    pull the center seat and the inspection panel,
    reach down and remove the bung.
    undo the 4 nuts holding the top plate on
    pour the oil in there till it comes out the filler...

    replace all the parts..

    2 minutes tops.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  10. 12th November 2006, 08:28 PM #10
    JDNSW's Avatar
    JDNSW
    JDNSW is offline RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,523
    Total Downloaded
    0
    Quote Originally Posted by Blknight.aus
    ........

    replace all the parts..

    2 minutes tops.
    Sounds like an idea - provided you can get the centre panel out without breaking any screw, and the same for the nuts on the top plate. Probably a good idea to clean the thick layer of dust, oil, mud, cow manure and grass seeds off before removing the plate, as this mixture does not improve the running of the transfer case.

    In my case I have the centre panel out anyway to check the oil in the overdrive.
    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol
    Reply With Quote Reply With Quote
« MD steering dampener conversion. | Vulnerable bits! »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!