4-bolt PAS Box - DIY rebuild???

G'day All, Rebuild wrong choice of word Replacement a better choice, and yes it is a fairly common fault cracked housing according to the lads at the garage cheers Dennis:wasntme:
PS Yes it was.:mad:

Quote:

---

Originally Posted by isuzurover

Is this discount only valid in South OZ?

---

In perth, contact "Transeals P/L" in Welshpool...

Ask for Russ Pitcher, and tell him your a mate of Mike Hayes, and that I told you he was to look after you.

The Hallite discount would really only work in NSW, where Roy is.
But for others wanting the discount in other places, PM me and I'll ring the local Managers (all mates of mine) and let them know your coming.

Quote:

---

Originally Posted by tombraider

In perth, contact "Transeals P/L" in Welshpool...

Ask for Russ Pitcher, and tell him your a mate of Mike Hayes, and that I told you he was to look after you.

The Hallite discount would really only work in NSW, where Roy is.
But for others wanting the discount in other places, PM me and I'll ring the local Managers (all mates of mine) and let them know your coming.

---

Thanks a lot Mike!!!

Quote:

---

Originally Posted by Blknight.aus

in its simplest form it is a lever with a spring gauge.

The important part of it being that it can read torque while in motion. (think ultra light weight dyno) whereas a normal torque wrench is only really good for static bolts.

you can, in a pinch also use a deflecting bar type torque wrench if it has the appropriate scale and has a deflection scale like an old scale as apposed to the little sliding wedge.

If the housing is cracked turf it.. You MIGHT be able to get it welded but then you have to worry about distortion and weak points in the weld.

(Edit adition) one of them up ^ there is exaclty it, measure the preload on the shaft by using that ^ to turn it and get the right torque

and yes you can just use a sprong balance on a wheel or lever.

basic formula being distance in inchesx pounds of force= inchlbs of torque...

12inlbs=1ftlb

---

thanx for the enlghtenment dave but as i thought the spring balance will do the same job there ya go i lernt sumfing 2 day :D :D :D

but i still cant spell

cheers

chris