Thread: Hafele drawer slides

G'day ron cant say ive used that brand of slides bt have used others and found the roller bering type tha go i have made all sorts of drawes and trays with slides to cary all different gear from drawers in comercial kitchens to roll out tays in fire trucks to carry heavy equipment up here in newcastle is a mob called ovesco they hav all types of slides and thats were i go if i need em for a job

www.ovesco.com.au have a gander here mate you will be supprised what they have i was

cheers

chris

p.s hows tha seal up goin

Hi Ron
My Bro is a cabinet maker,Ive asked him a few times about them.The ones you mentioned are the best you can get in the cabinet makers world,and basically all he would use.Matt did give me a couple of part nos of what he thought would do the job,but he wasnt 100% sure what I had in mind.In the end he gave me the same web addy you put up.I havent looked yet put he did say weigh my gear for the drawers and all the tech detail was online.
I WAS WARNED NOT CHEAP!!!!
If you do come up with a part no you want PM it to me,I will get you a price.
Andrew

There's a guy on eBay selling Hafele slides.
I can't use eBay at work but do a search under Hafele & he'll come up.
From what I've seen, he's cheap & likes selling in bulk.

Originally Posted by Scouse

There's a guy on eBay selling Hafele slides.
I can't use eBay at work but do a search under Hafele & he'll come up.
From what I've seen, he's cheap & likes selling in bulk.

No one in Aus selling Hafele on eBay.

Now, what are you like with Peugeot 405s?

Ron

Originally Posted by p38arover

No one in Aus selling Hafele on eBay.

I'll check my eBay history tonight. I got the impression he'd flogged them from the factory so maybe he's been busted !!!

Now, what are you like with Peugeot 405s?

Absolutely hopeless .
Is this the engine swap job ?

I have been looking at the Haefle sliders as well to replace a home made ball bearing setup which did not work as planned. Unfortunately you need to set up an account with them in order to buy from them, I think all that is required is an ABN number and 3 referrences, fortunately I have a couple of builder mates that have accounts with them.
Yes they can be expensive but they only sell quality stuff and is cheaper than buying similar things from the local hardware shop.

I went down there a couple of months back. They do sell to the public....but they are not cheap. My problem is I wanted the kitchen to come out 1500mm and the cheapest slides for that were $600!!!!

If you want it to slide about 900mm or less then you can easily get a set of their slides for around $120

out of interest how much weight can these slides hold?