Page 1 of 2 12 LastLast
Results 1 to 10 of 11

Thread: Noisey Td5

  1. 6th December 2006, 04:00 PM #1
    knotty7's Avatar
    knotty7
    knotty7 is offline Master
    Join Date
    Jan 1970
    Location
    Success WA
    Posts
    153
    Total Downloaded
    0

    Thumbs down Noisey Td5

    Hi everyone,

    My 1999 Td5 has a nasty rattle in the engine bay only at idle,
    seems to be getting worst, any ideas???????
    Reply With Quote Reply With Quote
  2. 6th December 2006, 05:36 PM #2
    tombraider Guest
    The engine?

    But seriously, more detail required...

    Bonnet up.... ? Which side, roughly where? etc etc...
    Reply With Quote Reply With Quote
  3. 6th December 2006, 06:37 PM #3
    LandyAndy's Avatar
    LandyAndy
    LandyAndy is offline RoverLord Gold Subscriber
    Join Date
    Feb 2004
    Location
    Williams West Aust
    Posts
    20,998
    Total Downloaded
    0
    Mine has a louder "diesel rattle" at idle since having its head gasket and oil in the harness,waiting to get it read on a Rovacomm to find out if all is well.
    Not running the best it has,wants to stall on take-off,poor performance,engine fans running constantly.
    Andrew
    DISCOVERY IS TO BE DISOWNED
    Midlife Crisis.Im going to get stuck into mine early and ENJOY it.
    Snow White MY14 TDV6 D4
    Alotta Fagina MY14 CAT 12M Motor Grader
    2003 Stacer 525 Sea Master Sport
    I made the 1 millionth AULRO post
    Reply With Quote Reply With Quote
  4. 6th December 2006, 07:28 PM #4
    meteor
    meteor is offline Fossicker
    Join Date
    Jan 1970
    Location
    Lane Cove
    Posts
    35
    Total Downloaded
    0
    Have you been doing any work under the bonnet? I had a similar problem where i'd dropped a 12mm socket bit, the vibrations at idle were enough for it to rattle around where it had came to rest....
    Reply With Quote Reply With Quote
  5. 6th December 2006, 07:57 PM #5
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,501
    Total Downloaded
    0
    a friends holden was doing this, it turned out to be the anti knock sensor...

    it may be just something that simple in the TD5. (but given the number of faults in the TD5 type treads that have come up recently I doubt it)
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  6. 7th December 2006, 12:19 PM #6
    knotty7's Avatar
    knotty7
    knotty7 is offline Master
    Join Date
    Jan 1970
    Location
    Success WA
    Posts
    153
    Total Downloaded
    0
    Hi,

    Yeah ive had a closer listen and its definitly comming from the front of the engine, it speeds up with engine revs and sometimes you can hear it and sometimes you cant
    Reply With Quote Reply With Quote
  7. 7th December 2006, 12:25 PM #7
    BigJon's Avatar
    BigJon
    BigJon is offline ForumSage
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Harmonic balancers can give a nasty rattle (and a nasty wallet dent, $660 for the part).
    Reply With Quote Reply With Quote
  8. 7th December 2006, 12:28 PM #8
    Frenchie's Avatar
    Frenchie
    Frenchie is offline Wizard
    Join Date
    Jan 1970
    Location
    Canberra
    Posts
    1,575
    Total Downloaded
    0
    Check that the crankshaft pulley bolt isn't loose. That happened on my Tdi Disco and it chewed the end off the crankshaft.
    Reply With Quote Reply With Quote
  9. 7th December 2006, 01:01 PM #9
    Scouse's Avatar
    Scouse
    Scouse is offline OldBushie Gold Subscriber
    Join Date
    Jan 1970
    Location
    Douglas Park, NSW
    Posts
    9,347
    Total Downloaded
    0
    You might need to isolate the ancilliaries by removing the serpentine belt. If the noise stops, it's one of them at fault.
    If it doesn't stop, then it's internal.

    Would a loose oil pump bolt rattle prior to falling out ?
    Scott
    Reply With Quote Reply With Quote
  10. 7th December 2006, 01:07 PM #10
    BigJon's Avatar
    BigJon
    BigJon is offline ForumSage
    Join Date
    Jan 1970
    Location
    Adelaide - Torrens Park
    Posts
    7,291
    Total Downloaded
    0
    Quote Originally Posted by Scouse
    You might need to isolate the ancilliaries by removing the serpentine belt. If the noise stops, it's one of them at fault.
    Or the harmonic balancer (speaking from experience).
    Reply With Quote Reply With Quote
Page 1 of 2 12 LastLast
« Steering Box Leak | What Wheels/Rims Do You Have? »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!