Thread: pajero,i know iknow iknow

Don't know. Thats the model SWMBO want's

Originally Posted by George130

Thats the model SWMBO want's

what's she wanna do to it?.....n why?.........

Shoguns are not a bad rig, but they need to have a few problems sorted.
Ditch the Jap running gear, Ditch the Jap styling, Ditch the Jap build...............

Ohhh yeah... that leaves you nothing... then buy a RANGIE

like i said to him (i told you so) i have a 93 disco and have had 2 s3's

I've often found that its easier to pull the motor than the gearbox anyway for a clutch replacement.

the motor is usually just the bell housing bolts...a few wires.....a throttle cable.....a couple of engine mounts.......radiator hoses....
and the engine pipe....and the block and tackle does all the work....plus youre working from above.......

the box has the transfer on it.....and two prop shafts....and cross members.....and the bell housing bolts.....and the clutch release......and the trim
inside to get the gear levers off.......and youre doing the whole lot flat on your back.....with a face full of mud and dirt......
and the box and transfer are BLQQDY heavy.......


when the engines out you can also give it a good degrease......check/replace welsh plugs.....and fix any leaks that it might have....
such as rear main.....

those engines were pretty simple and had plenty of room around them.....

thanks all.i/we will pull the motor out after xmas,and then tell/order/beg my son to buy some fine english? engineering.merry xmas all

Originally Posted by lewy

like i said to him (i told you so) i have a 93 disco and have had 2 s3's

Now you know why he bought a Paj.

Ron