Page 2 of 2 FirstFirst 12
Results 11 to 14 of 14

Thread: Clunking at takeoff.

  1. 14th January 2007, 02:18 PM #11
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,499
    Total Downloaded
    0
    Quote Originally Posted by WilliamB
    ok. I have the Diff lock axle ends.
    Looking in the manual it mentions incorrect/worn crown and pinion gears, excessive backlash (I have been looking for a preload spanner - to no avail yet).
    I will check the sound feels very "central" up front, and goes through to the gear box. It all feels worn which of course it will be given the age of the vehicle.

    I have a spare dif from the series 3 which is one good thing - but I must admit I am rnning out of time and money! the main reason I keep posting.
    A little worried about what I will find when I look.
    Diff lock axle ends? how about free wheeling axle ends?

    I can help you out with a set of second hand drive plates ( I think I may also have a set of free wheelers) and possabley a set of front half shafts.... When you come to pick them up if you bring the diff with ya If i can redo the preload for ya I will (the crushable spacer if fitted may be shot) right off the top of my head I think you need a 41 or 42mm socket for the preload nut.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  2. 14th January 2007, 02:37 PM #12
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,499
    Total Downloaded
    0
    If you can make the freight costs (I cant Im skint due to my upcoming move) I can pull the rear axle out of the trailer conversion Im doing and send that to you, The brakes need work but since I only need it to sit under a trailer its yours for the 2a if you want it....

    Its currently under a SWB SIII with a 4.7:1 diff in it and its just a standard rover diff....

    Ideally Id like one back eventually but I have a spare trailer axle I can bodgie under to keep the trailer mobile enough to get on the removalse truck

    If its likely to pan out I'll recheck the diff before it comes out and let you know the overall condition..
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
  3. 14th January 2007, 02:50 PM #13
    WilliamB's Avatar
    WilliamB
    WilliamB is offline Master
    Join Date
    Dec 2006
    Location
    Eastern Suburbs Sydney
    Posts
    114
    Total Downloaded
    0
    Thanks BlKnight
    I really appreciate it - Ill have to work out if any of this is possible at the moment. I am in Brisbane - about to move - and there are other factors involved.
    Ill look at my options probably tonight.
    Reply With Quote Reply With Quote
  4. 14th January 2007, 05:09 PM #14
    Blknight.aus's Avatar
    Blknight.aus
    Blknight.aus is offline RoverLord Vendor
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,499
    Total Downloaded
    0
    hrmmm...

    there is an off chance that as part of our move we will be coming through sydney (here we go again) so I might be able to drop it off to you there....

    also If you need it and want to have a crack at it I just happen to have an A frame that will pull your army rover quite nicely if you decide your going to flat tow one of the rovers.... (but that I want back) so providing you have a pintle hook and a trailer socket jumper lead (so all the towed vechiles lights work off the trailer plug you can save on the cost of trailering one rover.

    Dont forget you dont need all your diffs working in an old rover, just one... pull the half shafts from to dodgey one and drop the prop shaft and nurse it in. Brisbane to Sydney should be a doddle. (but not with another rover on the back.)
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.
    Reply With Quote Reply With Quote
Page 2 of 2 FirstFirst 12
« diff lock problem | One for the LR/RR Gurus (Gurii??) »

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules

Search AULRO.com ONLY!
 Search All the Web!