Thread: Braided brake lines

any pirtek hose shop
snake racing do them.

cost ya 80-120bucks EACH!!!!!!

pirtek will be cheaper than most.

cheers phil

Just make surethey are an approved modification. Qld. Transport, for one, can be bloody difficult about braided brake hoses.

Originally Posted by discowhite

any pirtek hose shop
snake racing do them.

cost ya 80-120bucks EACH!!!!!!

pirtek will be cheaper than most.

cheers phil

When I tried my local pirtek to get longer brake lines for my rangie (not wire braid), they told be that I had to go to a place that was approved to make automotive brake lines.

Went to a brake and clutch place and they had someone in Sydney make what I wanted.

I have seen the Snake Racing adds for steel braid brake lines.

Did a search for braided brake hoses some time ago. Here are the links I found:

http://www.cebcobrakes.com.au

http://www.cebcobrakes.com.au/html/s...op_id=58&dsa=1

http://www.braidedhoses.com.au/

http://www.pbrperformance.com.au/

http://www.brakequip.com.au/

Originally Posted by up2nogood

G'day all.

Part of my attempts to improve my braking on my '95 Disco/Bushranger.


Can anyone tell me where I could get these made up in Sydney?

Just order them from www.discoparts.com the guys UK based and does TUV/ADR compliant lines far cheaper than prices mentioned.

Or Paddock Spares http://www.paddockspares.com/sp/cate...scovery_1.html

Goodrich they are! http://www.goodridge.co.uk/

In Aus they are available here:
http://www.perthbrakeparts.com.au/ss-braided-hoses.asp

Ive looked at geting stainless braided lines for my rangie and when i got my new clutch kit the mob that supplyed it had braided lines made to any length and with all sorts of different fittings and they were approved for road use they are in east maitland carters break and clutch on melbourne st ph 0249333960 from memory they were about 80 bucks ea

cheers

chris

I'd recommend Carters Brake & Clutch also.
Used them a couple of times.
Great service.

But I suppose any reputable brake/clutch place will do.

I've just been into the local agent for braided hoses.com for a quote for the defender. 3 hoses 1x rear hose, 2 x front brakes quote for the 3 $150 - $200. I know that there is a $50 difference but the length of the rear brake hose was an unknown. I had a look at the hose, teflon inner, braided stainless with a clear outer. and i would refit the plastic coil and rubber protection, looked similar to the ones I was looking at bringing in from Expedition Exchange but these are longer for lifted landies and i just want standard length