Results 1 to 7 of 7

Thread: Play in diff

  1. #1
    Rocky4.4 Guest

    Play in diff

    Ok i new to this range rover 4wd stuff, Little help would be great guys.

    I have a 1980 2 door range rover 4.4 v8 and i think it has a lt95 gearbox, When i let the clutch out theres a small bang like a Stuffed uni joint, Got under and checked rear tailshaft all good checked front uni's are fine but i can turn tailshaft a little in diff and box, So i have put it down to that, My Question is should the front have any play at all??? Or should be tight like rear???
    Am i up for front diff and box??????
    Thanks Tim.

  2. #2
    Join Date
    Jan 1970
    Location
    Maryborough QLD
    Posts
    4,322
    Total Downloaded
    0
    The LT95 4 speeds like yours are known for there backlash andthis is commom. Some play is alright but if it's got copious amounts then your going to be up for some overhaul work on the center diff.

    Hope this helps. Good luck with it.

    Trav

  3. #3
    Rocky4.4 Guest
    Quote Originally Posted by aquarangie View Post
    The LT95 4 speeds like yours are known for there backlash andthis is commom. Some play is alright but if it's got copious amounts then your going to be up for some overhaul work on the center diff.

    Hope this helps. Good luck with it.

    Trav
    Its leaking a bit of oil too, so i might be up for a rebuild, Any ideas of ruff cost??
    I would say it would have about 1/8 play.

  4. #4
    Join Date
    Jan 1970
    Location
    Newcastle Area
    Posts
    315
    Total Downloaded
    0
    Play is normal.
    Leaks are normal.

    Leave it, and put up with it

  5. #5
    Rocky4.4 Guest
    Quote Originally Posted by Ralf_the_RR View Post
    Play is normal.
    Leaks are normal.

    Leave it, and put up with it
    I'll have to fix it as i need a rwc.

  6. #6
    Rocky4.4 Guest
    Well It seems as it was not the diff it is the transfere case, looks like its got gear oil not motor oil in it and the brass shimms are F^%ked.
    Been quoted $500 - $1000 to repair .
    Is this a Fair Price???

  7. #7
    Join Date
    Aug 2006
    Location
    Melbourn(ish)
    Posts
    26,504
    Total Downloaded
    0
    depends on how much needs rebuilding and how much is shimming.... $500-750 inc parts and labour would not be unrealistc.
    Dave

    "In a Landrover the other vehicle is your crumple zone."

    For spelling call Rogets, for mechanicing call me.

    Fozzy, 2.25D SIII Ex DCA Ute
    Tdi autoManual d1 (gave it to the Mupion)
    Archaeoptersix 1990 6x6 dual cab(This things staying)


    If you've benefited from one or more of my posts please remember, your taxes paid for my skill sets, I'm just trying to make sure you get your monies worth.
    If you think you're in front on the deal, pay it forwards.

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!