Page 1 of 3 123 LastLast
Results 1 to 10 of 27

Thread: central locking kits for 95 Defender

  1. #1
    Join Date
    May 2006
    Location
    Redesdale, Victoria
    Posts
    330
    Total Downloaded
    0

    central locking kits for 95 Defender

    Hello all.....

    just wondering if anyone from the brains trust can help me. I bought some c/l actuators for my defender and found they won't fit the front doors. i asked the Tint professor if they can fit a central locking kit and was told yes, but for a heft price. So my question is, has anyone fitted C/l to their older defender and, if yes, how hard was it and how much did it cost.

    Pm me the answers if you like...


    Thanks in advance

    Chris aka THB

  2. #2
    JDNSW's Avatar
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,538
    Total Downloaded
    0
    I fitted central locking to my pre-Defender 110 using one of the generic kits. Took a bit of ingenuity, but no real problems. The doors are different from the Defender, but I see no reason why this would present a problem, although I am not familiar with the inside works of the Defender doors.

    In my doors the actuators are low down in the doors and with long rods to connect to the locking plungers.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  3. #3
    Join Date
    May 2006
    Location
    Redesdale, Victoria
    Posts
    330
    Total Downloaded
    0
    My problem i foundd is the window, when wound all of the way down, would foul the actuator.....

    hmmmmmm

  4. #4
    JDNSW's Avatar
    JDNSW is online now RoverLord Silver Subscriber
    Join Date
    Jan 1970
    Location
    Central West NSW
    Posts
    29,538
    Total Downloaded
    0
    Quote Originally Posted by haggisbasher View Post
    My problem i foundd is the window, when wound all of the way down, would foul the actuator.....

    hmmmmmm
    The window does not go all the way to the bottom of the door, and also, as it goes down it gets closer to the outside - I can't remember which effect I took advantage of (and I am not going to pull the lining off to have a look), but I do remember that it was a fairly tight fit, but was possible.

    John
    John

    JDNSW
    1986 110 County 3.9 diesel
    1970 2a 109 2.25 petrol

  5. #5
    Join Date
    Jan 1970
    Location
    Melbourne, Vic
    Posts
    230
    Total Downloaded
    0
    Check out Defender200tdi gallery... he's got a gallery where he's installed the C/L kit in his wagon. I've done it in my '99 td5 using a generic kit (based upon Defender200tdi's install), not hard, just requires a bit of bending/zip-ties etc!
    Current: ‘16 Disco Sport (7seater) aka « Family Bus 2 »
    Sadly Gone: '77 RRC 2 Door aka "Beast"
    Gone: '92 RRC Vogue SE aka "The Family Bus"
    Long Gone: '99 Td5 Defender aka "The TANK!"

  6. #6
    Join Date
    Aug 2006
    Location
    Bexley NSW - Sydney
    Posts
    502
    Total Downloaded
    0
    where / how did you run the wires into the doors ?

    Did you do a tidy job with some protecting tube for the wires ? or just left them out hanging!

  7. #7
    Join Date
    May 2006
    Location
    Redesdale, Victoria
    Posts
    330
    Total Downloaded
    0
    i have hunted all over for Def220tdi galery....dya have any hints for where it is?.......

    'feeling very lost'


  8. #8
    Join Date
    Aug 2006
    Location
    Bexley NSW - Sydney
    Posts
    502
    Total Downloaded
    0
    Quote Originally Posted by haggisbasher View Post
    i have hunted all over for Def220tdi galery....dya have any hints for where it is?.......

    'feeling very lost'

    I did the same, no find ? Link anyone ?

  9. #9
    Join Date
    Jan 1970
    Location
    Melbourne, Vic
    Posts
    230
    Total Downloaded
    0
    From door-pillar, I just ran from the gap between the frame and trim into the side of the dash.
    Covering: I did mine just wrapping in electrical tape, but Defender200Tdi used some tubing that came with his kit.

    Sorry about not being able to find Defender200Tdi's gallery, I'm 100% sure there used to be one. I've got the shortcut at home, I'll see if the gallery is still there. I may have the pictures stored somewhere too...

    Maybe PM Defender200Tdi too for pics...
    Current: ‘16 Disco Sport (7seater) aka « Family Bus 2 »
    Sadly Gone: '77 RRC 2 Door aka "Beast"
    Gone: '92 RRC Vogue SE aka "The Family Bus"
    Long Gone: '99 Td5 Defender aka "The TANK!"

  10. #10
    Defender200Tdi Guest
    Quote Originally Posted by Cameron_Def View Post
    I did the same, no find ? Link anyone ?
    That was in my gallery on the old site, but I've never been able to find all the images since the new site started. Were they ever archived anywhere?

    Paul

Page 1 of 3 123 LastLast

Bookmarks

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  
Search AULRO.com ONLY!
Search All the Web!